Anti-scale system, Maintenance, Helpline

RN40635 MUK Rev2_Instruction Book 05/05/2011 16:39Page 6

The auto shut-off light Â will flash, indicating the product is in shut-down mode.

To reactivate the iron, gently shake it, the temperature indicator light will come on, indicating the iron is warming up. Wait for the iron to heat-up as normal.

Anti-scale system

(certain models only)

The life long anti-scale system reduces scale deposits and helps prolong the life of the iron.

MAINTENANCE

IMPORTANT: Do not descale the soleplate with descaling products, proprietary cleaning agents or vinegar when flushing out the soleplate.

To clean the exterior

Allow the iron to cool and wipe over with a damp cloth and mild detergent, then wipe with a dry cloth.

Emptying and storing

When you have finished ironing, unplug your iron. Ensure that the variable steam switch is set at the ‘O’ position E, lift up the filler cap and empty any remaining water out of the filling hole H. Do not store in the box, but in an upright position, so that any drops of water remaining cannot leak out and discolour the soleplate.

IMPORTANT: The flex can be damaged if wound too tightly around the iron after use. Make a loose loop with the flex and wrap it around the iron. The iron must be cool before winding the

flex and storing on its heel I.

To clean a coated soleplate

(certain models only)

In the unlikely event of any man-made fibre fusing to the soleplate, set the iron at the

3-dot position and pass it over a clean piece of cotton which will draw the deposit off the surface.

Do not use scouring powder or solution as this could cause damage to the coating.

To clean a stainless steel soleplate

(certain models only)

To keep the soleplate of your iron clean and free of limescale, we recommend that you use one of the gentle chrome, silver or stainless steel cleaners that are generally available. Always follow the manufacturer’s instructions.

To clean off melted man-made fibres, set the iron at the 3 dot position and pass it over a clean piece of cotton which will draw the deposit off the surface.

HELPLINE

If you have any difficulty with your appliance, do not hesitate to call us.

We are more likely to be able to resolve any issues than the store from where you bought it.

Please have the following information ready to enable our staff to deal with your query quickly:

•Name of the product.

•Model number as shown on underside of the appliance.

•Serial number as shown on underside of the appliance.

UK Helpline	0844 871 0960
Replacement Parts	0844 873 0726
Ireland Helpline	1800 409 119

6		UK Helpline 0844 871 0960 Replacement Parts 0844 873 0726 Ireland Helpline 1800 409 119