RN40635 MUK Rev2_Instruction Book 05/05/2011 16:39
Page 7
WEBSITE
You may also contact us through our website, or visit the site to browse and purchase appliances, spare parts and accessories from the extensive Morphy Richards range.
Location
•Do not use outdoors or near water.
•IMPORTANT: Do not use the product on a surface which could be damaged by heat or steam such as a worktop or a polished wood surface.
Children
•Close supervision is necessary when any appliance is used near children.
•Children do not understand the dangers associated with operating electrical appliances.
Personal safety
•WARNING: Burns can occur from touching hot metal parts, hot water or steam. Use caution when you turn a steam iron upside down, there may be hot water in the water tank.
•WARNING: To protect against the risk of electric shock, do not put the appliance in water or in any other liquid.
•Do not use the vertical steam feature on clothes that are being worn.
•Never allow the mains lead to over hang the work surface.
•Let the iron cool completely before putting away. Loop the cord loosely around the iron before storing.
•The socket should always be off before plugging or unplugging from the socket. Never yank the cord to disconnect from the socket, instead, grasp the plug and pull to disconnect.
•Do not allow the cord to touch hot surfaces.
Other safety considerations
•Use the iron only for its intended use.
•Always disconnect the iron from the electrical socket when filling with water or emptying, and when not in use.
•If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person(s) in order to avoid a hazard.
•Do not operate the iron with a damaged cord, or if the iron has been dropped or damaged and if there are visible signs of damage, or if it is leaking. To avoid the risk of electric shock, do not disassemble the iron, but telephone Morphy Richards for advice. Incorrect reassembly can cause a risk of electric shock when the iron is used.
Special instructions
If your iron does not work, check the following points:
•Has the temperature dial been set to the required temperature? Is the plug in its socket? Is the plug itself or the socket faulty? (Check by plugging in another appliance).
•WARNING: When not in use, your iron should never be placed flat and left on an ironing board.
•To prevent damage to the textile being ironed, follow the temperature guide carefully. (Test the inside of the hem of the garment).
•When ironing is complete, remove the plug from the socket, empty any remaining water from the tank, and allow to cool before storage.
•If you drop or severely knock your iron, this could cause internal damage even if the outside appears alright. Have it checked by a qualified electrician.
•It is recommended that you use up one beaker of water by operating your iron’s steam and shot of steam functions before ironing any clothes, as some dripping may occur while your iron’s steam system is activated.
ELECTRICAL REQUIREMENTS
Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply which must be A.C. (Alternating Current).
If the socket outlets in your home are not suitable for the plug supplied with this appliance, the plug should be removed and the appropriate one fitted.
WARNING: A damaged or severed mains cable fitted with a plug should never be connected to the mains supply. It must be destroyed, as a damaged cable becomes hazardous if connected to a power socket.
Should the fuse in the 13 amp plug require changing, a 13 amp BS1362 fuse must be fitted.
WARNING: This appliance must be earthed.
For details of other Morphy Richards products, please see our website: | 7 |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|