JVC SP-THS5F, SP-PWS51, XV-THS51 manual Connecting the satellite front, center, surround speakers

Connections

Connecting the satellite (front, center, surround) speakers

Note that the illustration below is for TH-S5.

Before connecting the speaker cords;

Twist and pull the insulation coat off and remove.

Speaker cord (supplied) 4 m

			• Connect the silver cords to the black (r) terminals.
			• Connect the copper cords to the (q) terminals
				referring to the table below:
		Front speakers		FRONT SPEAKERS (LEFT)	White
	TH-S5: SP-THS5F*1			FRONT SPEAKERS (RIGHT)	Red
(TH-S51: SP-THM303F*2)
				CENTER SPEAKER	Green
				SURROUND SPEAKERS (LEFT)	Blue
				SURROUND SPEAKERS (RIGHT)	Gray

Powered subwoofer

TH-S5: SP-PWS5
(TH-S51: SP-PWS51)
4 m
			10 m	Surround speakers
	Center speaker			TH-S5: SP-THS5S*1
		1	(TH-S51: SP-THM303S*2)
	TH-S5: SP-THS5C*
	(TH-S51: SP-THM303C*2)
*1 For TH-S5			*2 For TH-S51, the satellite speakers are equipped with their speaker cords attached
			directly to their speaker unit instead of having speaker terminals on their cabinet.
Silver	Copper
	Red		Front/Center	Surround
Black			speakers	speakers

CAUTION

•When you connect speakers other than the supplied ones, use speakers of the same speaker impedance (SPEAKER IMPEDANCE) indicated near the speaker terminals on the rear of the powered subwoofer.

•DO NOT connect more than one speaker to one speaker terminal.

•When installing the satellite speakers on the wall;

•Be sure to have them installed on the wall by a qualified personnel. DO NOT install the satellite speakers on the wall by yourself to avoid unexpected damage from their falling off the wall due to incorrect installation or weakness in wall structure.

•Care must be taken in selecting a location for speaker installation on a wall. Injury to personnel or damage to equipment may result if the speakers installed interfere with daily activities.

9