JVC SP-THM303C, SP-PWS51, XV-THS51, SP-THS5F manual Tuner operations, Manual tuning, Preset tuning

Tuner operations

IMPORTANT

Before using the remote control for the following operation;

1 Set the remote control mode selector to

AUDIO.

2 Press FM/AM.

The buttons described below are used on pages 38 to 41.

FM/AM

		AUDIO	Remote control
			mode selector
TUNING	TA/NEWS/INFO TUNING
PTY	MEMORY FM MODE	PTY	PTY
	PTY
	SEARCH		PTY SEARCH
	DISPLAY		RDS DISPLAY
	RDS

Number buttons

Manual tuning

1 Press FM/AM repeatedly to select the band.

Example:

When the system is tuned in to 810 kHz.

8 1 0 k

2 Press TUNING 9/( repeatedly until you find the frequency you want.

When you hold down the button until the system starts searching for stations and then release it, the system stops searching automatically when a station of sufficient signal strength is tuned in to.

NOTE

•When a station of sufficient signal strength is tuned in, the TUNED indicator lights on the display window.

•When an FM stereo program is received, the ST indicator lights on the display window.

Preset tuning

Once a station is assigned to a channel number, the station can be quickly tuned in. You can preset 30 FM and 15 AM (MW) stations.

7To preset the stations

1 Tune in the station you want to preset.

•If you want to store the FM reception mode for an FM

station, select the reception mode you want. See “Selecting the FM reception mode” (A pg. 39).

Example:

When the system is tuned in to 103.5 MHz.

1 0 3 . 5 0 M

2 Press MEMORY.

__ 1 0 3 . 5 0 M

While “CH” and “– –” are flashing:

3 Press number button(s) (1-10, +10) to select a preset number you want.

•For details on using the number buttons, see “How to use the number buttons” (A pg. 20).

Example:

When the preset channel 1 is selected.

1 1 0 3 . 5 0 M

If the setting is cancelled before you finish, start from step 2 again.

While the selected number is flashing:

4 Press MEMORY.

The selected number stops flashing.

The station is assigned to the selected preset number.

If the setting is cancelled before you finish, start from step 2 again.

5 Repeat steps 1 to 4.

•Storing a new station to a used number erases the previously stored one.

7To tune in to a preset station

1 Press FM/AM repeatedly to select FM or AM.

2 Press number button(s) (1-10, +10) to select a preset number.

•For details on using the number buttons, see “How to use the number buttons” (A pg. 20).

38