Gemini PL-2410 E Steam Ironing, Spray, Extra Steam, Automatic SHUT-OFF, Language Selection

7.STEAM IRONING

1.Fill the iron as described in Section 3 “Filling the water reservoir” and plug in the iron. Press the “increase temperature” regulator (6) to turn on the unit.

2.The LCD screen (4) will show all the symbols at once and you will hear a beep. Then the screen will show Point 1 and the iron will start to heat up.

3.Select the right temperature. See Section 4 “Setting the temperature”.

4.Select the steam option by pressing the steam

button (5). The iron will give a whistle and

the symbol will start flashing. Wait until the symbol appears on the screen indicating that the steam is ready

5.When you want to disconnect the steam, again

press the steam button (5). The	symbol will
stop flashing.

6.If you wish to disconnect the iron, hold the “increase temperature” setting (6) down for 2 seconds (Fig. D). The screen will go off with a beep.

7.Unplug the iron and let it cool down before storing it away.

8.SPRAY

To use this function there must be water in the reservoir. If you wish to obtain a spray of water to dampen dry or difficult-to-iron fabrics, press the spray button (2). The spray function is also useful to dampen creases created by accident while ironing. The spray of water will come through the spray nozzle (9) (Fig. E).

N.B.: It may be necessary to press the spray button several times to activate this function.

9. EXTRA STEAM

Switch the iron on, as indicated in Section 6 “Steam ironing”. When the iron has reached the temperature selected, press the extra steam button (3) while ironing and the steam will come through the holes in the sole (Fig. F) onto the fabric, smoothing out the most difficult creases. Wait for at least 5 seconds between each use of the extra

steam button so as to allow the iron to heat up again and thereby obtain the maximum amount of extra steam.

Upright steam: The extra steam function also works when the iron is in an upright position. To use this function, hold the iron upright around 15-30 cm away from the item, press the extra steam button (3), and the steam will come out of the holes in the sole (Fig. G).

CAUTION: Do not direct the iron towards people as the temperature of the steam is very high.

10. AUTOMATIC SHUT-OFF

The shut-off function will work automatically when the iron is left unattended whilst connected to the mains.

•Automatic shut-off while the iron is horizontal position or lying on its side: If the iron remains immobile for 30 seconds in an ironing position (horizontal or on its side), the iron will disconnect automatically. The " " pause symbol on the LCD screen and the light will go off. To reconnect, simply move the iron.

•Automatic shut-off in the upright position:

If the iron remains immobile for 8 minutes on its support base (upright), the iron will disconnect automatically. “AUTOMATIC SHUT-OFF” will appear on the LCD screen and the light will go off. To reconnect, simply move the iron. N.B: the iron will take 60 seconds to reach its previous temperature.

11.LANGUAGE SELECTION

Hold the “lower temperature” setting down for 2 seconds (7) (Fig. H). EN will appear on the LCD screen (4). Press the “lower temperature” setting (7) again to change the language. The language will change from EN (English ) to DE (German), and from DE to FR (French). To select the desired language, press the “increase temperature” setting (6) and the language selected will be set.. N.B.: The default language is English.

13