Hoover HPM130, HPM110, HPM150, HPM120 manual Water supply requirements

05651318.qxd 31-07-03 21:38 Page 8

Cold Water Supply

If you have no hot water supply or your hot water pressure is low:

A cold fill adapter , allowing the installation of the machine with a cold water supply only can be purchased from Gias Service

(Tel. No. 01204 556111).

Water supply requirements

Connect the machine to the drainage system used by household sinks.

THIS MACHINE MUST BE CONNECTED IN ACCORDANCE WITH THE WATER SUPPLY REGULATIONS. WATER BYELAWS PROHIBIT CONNECTION TO A SURFACE WATER DRAIN.

No other appliance should be plumbed into the standpipe.

There are two possible arrangements which can be seen below :-

HOSE SUPPORT

CROOK

DRAIN HOSE

12-15cm

32mm

min 80cm -60

	FIX SECURELY
	ABOVE OVERFLOW
HOSE SUPPORT CROOK	OUTLET OF SINK

DRAIN HOSE

ATTACH HOSE

SECURELY TO

WASTE OUTLET

For the washing machine to function properly the outlet end of the drain hose must be at a minimum of 60 cm and a maximum of 80 cm from the ground.

8