GE WBB4500 Cleaning the Fabric Softener Dispenser on some models, Liquid Bleach Dispenser, Safety

Page 9

www.GEAppliances.com

The Agitator Cap or Fabric Softener Dispenser (depending on model)

Safety

The agitator cap fits into the top of the agitator. If it accidentally comes off, simply put it back on.

The fabric softener dispenser automatically releases liquid fabric softener at the proper time during the cycle.

Do not stop the washer during the first spin. This will cause the dispenser to empty too soon.

To use, follow these steps:

1 Make sure dispenser is securely attached to agitator.

2 Use only liquid fabric softener. Pour into dispenser, using amount recommended on package.

3 Add water to dispenser until it reaches the maximum fill line.

Do not pour anything into the agitator if the agitator cap or dispenser is removed.

Instructions

Operating

Separate for cleaning

Never pour fabric softener directly on clothes.

It may stain them.

Cleaning the Fabric Softener Dispenser (on some models)

 

Remove the dispenser from the top of the agitator.

1

 

Separate the dispenser cup from the cover by grasping the top and pushing down on

2

the inside of the cup with your fingers. Dispenser cup will pop free from the cover.

 

3 To clean the dispenser, soak both the dispenser cup and the dispenser cover in the following solution:

■1 US gallon (3.8 liters) warm water

■1/4 cup (60 ml) heavy-duty liquid detergent

■1 cup (240 ml) bleach

4 If necessary, loosen buildup with a clean, soft cloth after soaking. Do not use a stiff brush; you may roughen the surface of the dispenser.

5 Rinse and reassemble dispenser. Place dispenser back on the agitator.

Liquid Bleach Dispenser

The dispenser dilutes liquid chlorine bleach before it reaches into your wash load.

 

Check clothing care labels for special instructions.

1

 

Measure liquid bleach carefully, following instructions on the bottle.

2

 

■ Never pour undiluted liquid chlorine bleach directly onto clothes or into the wash basket.

 

■ Do not pour powdered bleach into bleach dispenser.

3 Before starting the washer, pour measured amount of bleach directly into bleach dispenser. Avoid splashing or over-filling dispenser. If you prefer to use powdered bleach, add it into the wash basket with your detergent.

■Do not mix chlorine bleach with ammonia or acids such as vinegar and/or rust remover. Mixing can produce a toxic gas which may cause death.

9

Instructions

Troubleshooting Tips

Consumer Support

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Washers Water Heater Safety When Using the Washer Model EWA4500 Model WBB4500 Model WKSE5260 About the control panelPage Temperature About the control settingsColor Logic Load SizeCasuals Wash CycleAutosoak Option on some models About washer features2nd Rinse Option on some models Extended Spin Option on some modelsCleaning the Fabric Softener Dispenser on some models SafetyLiquid Bleach Dispenser Sorting Wash Loads Loading and using the washerCare and Cleaning of the Washer Before you call for service… Clothes too wet Washer won’t operateColored spots Grayed or yellowedPilling Peel off cleanlySnags, holes, tears, rips Or excessive wearGE Washer Warranty What Is Not CoveredFor The Period We Will Replace Parts and Accessories Schedule ServiceConsumer Support GE Appliances Website Real Life Design Studio

WARE5260, EWA4500, WBB4500 specifications

The GE WBB4500, EWA4500, and WARE5260 are exceptional offerings from General Electric, known for their innovative technologies and robust features. Each of these models caters to a range of industrial applications, emphasizing efficiency, reliability, and advanced engineering.

Starting with the GE WBB4500, this model is designed primarily for packaged air conditioning systems. It stands out due to its energy efficiency, which is critical for reducing operational costs in both commercial and industrial settings. The WBB4500 features variable speed compressors, which adjust the cooling output based on the system's demand, ensuring optimal performance while minimizing energy consumption. Additionally, the unit incorporates advanced diagnostics and monitoring capabilities, allowing for real-time evaluation of system performance and simplifying maintenance procedures. The noise-reducing design enhances the user experience, making it ideal for sensitive environments.

Next in line is the EWA4500, known for its versatility in water heating applications. This model features robust insulation technology that significantly improves thermal efficiency, reducing heat loss and savings on operational expenses. The EWA4500 is equipped with smart controls that enable precise temperature regulation, along with user-friendly interfaces for easy adjustments. Its compatibility with various energy sources, including electric and gas, makes it an adaptable solution for diverse settings. Furthermore, the EWA4500 is designed with safety as a priority, integrating multiple protection mechanisms that ensure safe operation and prolonged lifespan.

The WARE5260 is a standout model in the boiler sector. It showcases state-of-the-art combustion technology that optimizes fuel efficiency while adhering to strict emissions standards. The WARE5260's modular design allows for easy integration into existing systems, minimizing downtime during installation. It also features cutting-edge monitoring systems that provide critical data insights, ensuring peak operational efficiency. Additionally, the unit boasts enhanced reliability through its robust construction materials, enabling it to perform in the most demanding environments without compromising on performance.

In summary, the GE WBB4500, EWA4500, and WARE5260 are engineered with unique features and advanced technologies tailored to meet the rigorous demands of industrial applications. Their energy efficiency, smart monitoring features, and superior design make them leaders in their respective fields, reinforcing GE's commitment to innovation and quality in the industry.
Top Page Image Contents