How to use the Fabric Softener Dispenser
How to Use the | How to Use the |
Soak Cycle |
|
●Position the Fabric Softener Dispenser on the
●Pour manufacturer’s recommended amount of fabric softener into a standard measuring cup.
●Add enough water to fill the cup 1/2 full.
●Pour the diluted softener into the dispenser.
●The fabric softener will automatically be dispensed at the proper time.
●Do not stop the washer during the first spin. This will cause the dispenser to empty tQo soon.
When using Fabric Softener Dispenser with the
c Do not use the Fabric Softener D~penser with the Soak Cycle.
●If the rinse dispenser gets clogged, soak it in a solution of 1 cup water and 1 cup alcohol.
. |
Regular Cycles | A#&ss |
| “: | ‘;:;:~ |
|
|
| Permane | |
~,@’OFF ● ‘*.& | ||||
| \\lt |
| ●o | |
| ,* |
| and Knm | |
| Soak Cvcle .0 |
|
| ● OFF |
|
|
|
| START |
| LIGHT SON 9 |
|
| Pre Was/ |
| NORMM ● |
|
| |
| MfAVV |
|
|
|
| NJTOEXTRARINSE | 0, |
| NORMAL |
|
|
|
|
( | Extra Ch |
|
““SOAK CYCLE” temperature is controlled by the Rinse temperature switch. (If a warm soak is desired, set the WASH/RINSE TEMPERATURE switch
to “HUI’/WARM:’)
●Be sure “Extra Rinse” control is turned “OFF:’
●If a hot soak is desired, set the
WASH/RINSE TEMPERATURE switch to “HCYT/WARM” and turn the Cycle Selector Knob to “NORMAL” in the Regular Cycle. Start the washer. After washer fills and begins to agitate, push in the Cycle Selector Knob and turn to “SOAK CYCLE:’ Pull out the Cycle Selector Knob to complete the cycle.
●For an extended soak allow the washer to fill and agitate for a few minutes to dissolve the soaking agent. Then push in the Cycle Selector Knob to stop the washer (keep lid closed) and allow to soak for as long as desired. After desired soak period, pull out the Cycle Selector Knob to complete the cycle.
●Do not use the Fabric Softener Dispenser or the
9
- |
The
●LINT
●LID FOR THE
NOTE: Do not use the