ASSEMBLY
How to change the clamping force of the bar
Check weather the handle feel loose.
Turn the outer handle clockwise as far as possible and make a mark in the top position of the centre nut. Turn the outher handle anticlock- wise to remove it.
Loosen the nut holding the outher handle to the centre nut.
Disassemble the outher handle, centre nut, nut and rubber washer. Position the mark on the centre nut aligned with the outher handle and reassembles the rubber washer and the nut.
After the adjustment, the outher handle shall point upwards when it has been turned clockwise as far as possible.
NOTICE! During all reassembling, make sure that the outer cover fits in to the inner cover, the covers may be damaged otherwise.
14 – English
