SAFETY INSTRUCTIONS

3 Muffler

Never use a machine that has a defective muffler.

Check regularly that the muffler is secured to the engine body.

4 Throttle lock

1Make sure the throttle

control is locked at the idle setting when you release the throttle lock.

2Press the throttle lock and make sure it returns to its original position when you release it.

3Check that the throttle

control and throttle lock move freely and that the return springs work properly.

4Start the saw and apply full throttle. Release the

throttle control and check that the chain stops and remains stationary. If the chain rotates when the throttle is on idle setting you should check the carburettor idle adjustment. See the section on ”Maintenance”.

!WARNING! Never use a cut-off saw with defective safety equipment. The cut-off saw’s safety equipment should be checked and maintained as described in this Operator’s Manual. If your cut-off saw does not meet any of these controls you should contact your service workshop.

GENERAL SAFETY INSTRUCTIONS

IMPORTANT INFORMATION!

Do not use the cut-off saw until you have read the entire contents of this Operator’s Manual. All servicing, in addition to the points listed in the section ”Control, maintenance and service of the machine’s safety equipment”, should be carried out by trained service specialists.

Use the equipment recommended in the chapter ”Personal protective equipment”.

Never use the machine when you are tired, under the influence of medicines/drugs or alcohol.

Do not lend the cut-off saw to anyone without providing this Operator’s Manual. Ensure the person using the cut-off saw understands the information in this Operator’s Manual.

Storage

Store the cut-off saw under lock and key so that it’s out of reach for children and unauthorised persons.

6 – English

Page 6
Image 6
Husqvarna K950 CHAIN manual General Safety Instructions, Storage