GE G132 Make sure cord is plugged securely into a working outlet, Check controls, Press Start

		GEAppliances.com
OPERATION	Possible Causes	What To Do
Washer won’t operate	Washer is unplugged	• Make sure cord is plugged securely into a working outlet.
	Water supply is turned off	• Turn both hot and cold faucets fully on.
	Controls are not set properly	• Check controls.
	Lid is open—safety feature	• Close lid and reset cycle, to the beginning if necessary.
	prevents agitation and
	spinning when lid is up
	Circuit breaker/fuse is	• Check house circuit breakers/fuses. Replace fuses or
	tripped/blown	reset breaker. Washer should have a separate outlet.
	Electronics need to be reset	• Unplug washer, wait 2 minutes, plug back in and press START.
	START was not pressed	• Press START.
	Lid magnet missing	• Call for service.
Time not shown	Unit filling	• This is normal. Estimated time remaining is updated during
on display		fill time.
Movement inside machine	Shifting mechanism is	• When the machine is manually turned off, the shifter will
when shut off	disengaging the motor	disengage the motor before completely shutting down.
		If lid is raised before the motor is disengaged, it will resume
		when lid is closed.
Basket seems loose	Basket moves or rotates freely	• Washer basket does not have a traditional brake. Basket will
		move freely. This is normal.
PERFORMANCE	Possible Causes	What To Do
Clothes too wet	Incorrect cycle selected	• Make sure the cycle selected matches the load you are
		washing. Some fabrics will feel wetter when rinsed with cold water.
	Wash load out of balance	• Redistribute load in washer and run through Drain & Spin cycle.
Colored spots	Incorrect use of fabric	• Check fabric softener package for instructions and follow
	softener	directions for using dispenser.
		• Make sure you have selected the Fabric Softener option.
		• Pretreat stain and rewash.
	Dye transfer	• Sort whites or lightly colored items from dark colors.
Grayed or yellowed	Detergent amount	• Be sure to follow detergent manufacturer’s directions.
clothes
	Hard water	• Use a water conditioner like Calgon brand or install
		a water softener.
	Water is not hot enough	• Make sure water heater is delivering water at
		120°F–140°F (48°C–60°C).
	Washer is overloaded	• Load clothes loosely in washer basket. Adjust load size based on
		items size and material. For best results, load items around the
		outside of the basket.
	Detergent is not dissolving	• Add detergent to the wash basket before you load clothes.
	Dye transfer	• Sort clothes by color. If fabric label states wash separately,
		unstable dyes may be indicated.
Lint or residue on	Clothes are air or line dried	• If you do not dry your clothes with a clothes dryer, your
clothes		clothes may retain more lint.
	Incorrect sorting	• Separate lint producers from lint collectors.
	Washing too long	• Wash small loads for a shorter time than larger loads.
	Detergent not dissolving	• Add detergent to wash basket before you load clothes.
		• Try a liquid detergent.
		• Use warmer water temperature.
	Overloading	• Load clothes loosely in washer basket. Adjust load size based on
		items size and material. For best results, load items around the
		outside of the basket.
	Incorrect use of fabric	• Check fabric softener package for instructions and follow
	softener	directions for using dispenser.
		• Make sure you have selected the Fabric Softener option.
		9

Safety Instructions

Operating Instructions

Troubleshooting Tips

Consumer Support