Hamilton Beach 840127400 Optional Features on select models, Caring and Cleaning, Power On Light

Page 4

Optional Features (on select models)

Auto Shutoff Reset Button/Light

This light comes on when the iron is first plugged in. After one hour, the iron will shut off and the light will go out. Push the Reset Button to turn the iron back on for another hour of ironing.

Power On Light

This light comes on when the iron is plugged in and remains on until the iron is unplugged. The light stays on even if Temperature Control Dial is turned to Off.

Spray Button

Push spray button to release a fine spray of water for difficult wrinkles in cotton or linen.

Caring and Cleaning

Iron

1.Turn Temperature Control Dial to Off ( O ). Unplug and let cool. The iron takes longer to cool down than it does to heat up.

2.To empty water from iron, slowly tilt pointed end of iron down over a sink. Water will run out of water tank opening.

3.Wrap cord loosely around iron and store iron in an upright position. Do not store iron laying flat on soleplate.

Soleplate

1.Never iron over zippers, pins, metal rivets, or snaps, as these may scratch the soleplate.

2.To clean occasional build-up on the soleplate, wipe with a sudsy cloth. Do not use abrasive cleansers or metal scouring pads.

3.Always store iron upright in the heel rest position.

6

7

Image 4 Contents
Steam Iron Important Safeguards Please Read Before First UseSteam Settings Parts and Features How to Steam IronHow to Dry Iron Optional Features on select models Caring and CleaningAuto Shutoff Reset Button/Light Power On LightU.S Canada