840091300 ENv01 9/24/01 4:32 PM Page 4
Using Your Iron
To Dry Iron
1.Plug iron into outlet.
2.Set the Adjustable Steam Knob
to 
( Dry Iron).
3.Turn Temperature Control Dial to desired temp- erature. Allow two minutes for
iron to reach desired temperature.
4.To turn iron Off, turn Temperature Control Dial to Off and unplug iron.
To Steam Iron
1.Unplug iron. Turn Adjustable Steam Knob to 
(Dry
Iron). Place iron soleplate on flat surface. Open water fill cover.
2.Using a cup, slowly pour 6 ounces of tap water into water tank opening. Do not fill iron directly from the faucet.
3.Plug iron into outlet. Set iron upright on heel rest.
4.Turn the Temperature Control Dial to desired fabric setting in the steam range.
5.Allow two minutes for the iron to reach desired temperature.
6.Set Adjustable Steam Knob to the recommended steam level. See the “Fabric
Setting Chart.”
7.To turn iron off, set Adjustable Steam Knob to 
(Dry Iron). Turn the Temperature Control Dial to Off. Unplug iron.
8.Empty water from the iron following directions in “Caring for Your Iron.”
Water
Please use ordinary tap water. If you have extremely hard water, alternate between tap water and distilled water for use in the iron.
4