Getting to Know Your Garment Steamer

OPERATING INSTRUCTIONS cont.

GETTING TO KNOW YOUR GARMENT STEAMER

Preparing Garment

Steamer for Use

CAUTION: Before filling the water tank, check to make sure that the water tank sits securely in the unit before proceeding.

Step 1: Preparing for Use

1.Unwind the power cord.

2.Check the wheels to see that they swivel and roll properly.

3.Set the unit on the floor and remove the water tank. Check for sediment or build-up in the base of the unit reservoir and water tank. Follow steps for cleaning and storing the unit if water was accidentally left in the water tank during storage of the unit on page 8.

4.Place the steamer hose with the nozzle end up on the garment hook.(See fig. 7)

3.After filling the water bottle, close the cap clockwise. (See fig. 8)

Fig. 8

4.Replace the water tank into the unit. (See fig. 9)

Fig. 7

Fig. 9

5.Make sure that the hose is and unencumbered and that the unit rolls freely.

Step 2: Filling the Water Bottle

IMPORTANT: Do NOT add cleaning solutions, scented perfumes, oils or any other chemicals to the water used in this appliance. Use tap water or distilled/purified water if the tap water in your area is very hard.

1.Always make sure that the appliance is unplugged before filling the water bottle.

2.To open the cap on the water bottle, turn counterclockwise. Fill the water bottle with tap water or distilled/purified water if your tap water in your are is very hard.

(See fig. 8)

Step 3: Using Garment Steamer

Note: It will make pressing easier if there are few creases in the laundry that needs pressing. To avoid excess creasing, shake each item out before placing in a drier or hanging to dry.

1.Always check that the On/Off switch is in the “Off” position.

2.Plug appliance into electrical outlet.

3.Push the “On/Off” switch to the “On” position. The power “On” light (green) will come on.

1.	Garment Hook	7.	Steamer Head
2.	Garment Rod Extensions (3)	8.	Steam Diffuser/Handgrip
3.	Water Tank	9.	Steamer Hose
4.	Power Cord	10.	On/Off Switch
5.	Wheels	11.	Power On Light (Green)
6.	Garment Brush	12.	Front Caster Wheel

Technical Specifications

Voltage:	120V~ 60Hz.
Power:	1500 Watts
Water Capacity:	150 US Fl. Oz. (4.5 liters)
Max. Steam Temperature:	220°F
	4