GETTING TO KNOW YOUR STEAM STATION IRON
USER MAINTENANCE INSTRUCTIONS
Before using your Steam Station Iron, remove any labels, stickers or tags that may be attached to the body or soleplate of the iron.
When turned on for the first time, your new iron may emit an odor for up to 10 minutes. This is due to the initial heating of the materials used in making the iron.
1. | Temperature Control Dial (Rotate Dial) |
2. | Steam Button |
3. | Temperature Pilot Light |
4. | Iron Stand |
5. | Water Tank |
6. | Water Filling Hole |
7. | Rubber Mat |
8. | Power Cord |
The odor is safe and should not reoccur after initial heating.
Also, before ironing with steam for the first time, allow iron to heat, hold in a horizontal position and hit the steam button several times. The iron may emit some small particles from the steam holes. This is normal and will clear after pressing the steam button several times.
Cleaning the Iron
1.Unplug the steam station from the electrical outlet
2.When finished using the iron, turn the temperature control dial to “MIN”.
3.Allow the iron to cool down before cleaning.
4.Scale and other deposits can be wiped off the soleplate with a damp cloth and some
5.Keep the soleplate smooth, avoid hard contact with metal objects.
6.From time to time, clean the inside of the water tank by filling with water and shaking.
Storage
•Remove the power cord from the wall outlet.
•Pour any remaining water out of the water tank.
•Set the steam control to position “0”.
•Put the iron on the rubber mat on its stand and let cool down sufficiently before you store it.
•Regularly check if the power cord is still in a good and safe condition.
9. | Connecting Hose/Supply Hose |
10. | |
11. | Water Tank Lock |
12. | Pump “On” Light |
Technical Specifications
Voltage: | 120V., 60Hz. |
Power: | 1400 Watts |
HOW TO REPLACE THE “ANTI-CALC” CASSETTE
•The
•Rotate and release the head of the cassette, then take it out.
•Empty the water from the water tank and cassette housing.
•Fill the water tank with water.
•Insert the new cassette and lock it into the water filling hole.
•Push steam button for about one minute. The new cassette is now filled with water.
•You can resume ironing.
To order additional
Call Customer Service
In US.:
Monday to Friday 8:30 AM – 5:00 PM Eastern Standard Time
or visit our website at:
3
8