Additional Important Safeguards

1.To avoid circuit overload, do not operate another appliance on the same socket (circuit) as the steam cleaner.

2.If an extension cord is absolutely necessary, use a 14 gage cord rated at a minimum of 15 amperes. Cords rated for less amperage may overheat. Care should be taken to arrange cord so that it cannot be pulled or tripped over.

3.Do not leave unattended when the system is connected to a power supply/electrical outlet.

WARNING: This appliance is equipped with a grounded, type 3-wire cord (3-prong plug). This plug will only fit into an electrical outlet made for a 3-prong plug. This is a safety feature. If the plug should fail to fit the outlet, contact an electrician to replace the outlet. Do not attempt to defeat the safety purpose of the grounding pin, part of the 3-prong plug.

CAUTION: Always drain condensed water from hose before use or if unit has been left idle for a period of time. To drain hose, direct nozzle into an appropriate container or sink and depress hand grip steam trigger. Once hose has been drained, normal use may be resumed. Never direct nozzle towards people, animals or plants.

WARNING: Your Steam Cleaner is designed to clean hard surfaces

OPERATING INSTRUCTIONS

Temperature Control Guide

and upholstery that will withstand high heat. Do not use on soft plastics and cold glass. On surfaces that have been treated with wax or some no wax floors, the sheen may be removed by the heat and steam action. Do not use on unsealed wood. This could cause the wood grain to rise. It is therefore recommended to test an isolated area of the surface to be cleaned before proceeding.

IMPORTANT: Do NOT add cleaning solutions, scented perfumes, oils or any other chemicals to the water used in this appliance.

Use regular water or distilled/purified water if the tap water in your area is very hard.

WARNING: Danger of Scalding. Please use caution when using the steam cleaner or iron. Steam emitted is very hot.

SAVE THESE INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

•Damp Steam: You can iron any fabric with damp steam as long as you turn the temperature control dial to the “Wool” setting.

•Dry Steam: With the iron temperature at the “Linen” setting, ironing will be more efficient.

•For delicate fabrics: Press the steam release button before placing the iron on the fabric.

•The “Silk/Nylon” setting can not be used for steam ironing. This setting is designed only for dry ironing.