Figure I
Figure J
Holding the iron in the ironing position over a sink or basin, press and hold the Self Clean Button down until all the water has been released. This can be done with one or two hands as shown in Figures I and J. Choose the method which is easiest for you.
Place the iron on its Heel Rest and heat for about 2 minutes to dry out any remaining water. Iron over an old towel. Cool as usual.
NEED HELP?
IRON WON’T HEAT?
Is the PUSH ON LIGHT on? Push in to turn iron on.
If the Light is not on, will a lamp plugged into the outlet turn on?
Is the Temperature Selector Dial turned to a fabric setting?
IRON WON’T START STEAMING?
Is the PUSH ON Light on and has the iron heated for about 2 minutes?
Check for water by looking in the Water Windows. Is the
Adjustable Steam Dial set at 
, 
, or 
? Adjust the Dial to Dry and back to the desired steam level.
If steaming doesn’t start, gently tap the Soleplate on the ironing board once or twice.
10