Black & Decker F611 manual Service or Repair

Page 11

WATER DROPLETS COMING FROM STEAM VENTS?

SERVICE OR REPAIR

Is the PUSH ON Light on and has the iron heated for about 2 minutes?

Is the Temperature Selector Dial set in a steam area and is the Adjustable Steam Dial set at the corresponding , , or ?

Service, if necessary, must be performed by a Black & Decker (U.S.) Inc., Household Appliance Company-Owned or Authorized Service Center. The Service Center nearest you can usually be found in the yellow pages of your phone book under ”Electric Appliances-Small-Repairing.“ For your convenience a complete listing of our Company- Owned Service Centers is listed on pages 13-14.

Before shipping or mailing your iron, empty all water from the iron. Plug in the cord and heat the iron at the maximum temperature setting. Iron continuously over an all cotton cloth for about 5 minutes. Then place the iron on its Heel Rest and leave it operating for 7 to 8 minutes. These steps will help to dry the inside of the iron.

Turn the iron off, move the Adjustable Steam Dial to Dry and be sure the iron is completely cool before packing for shipment. Pack it carefully into a sturdy carton with enough packing material to prevent damage. The original carton is not suitable for mailing. Include a note describing the problem to our Service Center and be sure to give your return address. We also suggest that you insure the package for your protection.

11

Image 11
Contents Model F611 ProXpressSpecial Instructions Important SafeguardsPolarized Plug Spray SettingsPreparing IronStarting the Iron Filling with WaterDRY Using MoistureStoring the Iron SprayFabric Ironing Chart Emptying the Iron Self CleaningCare of the Iron Iron WON’T HEAT? Need HELP?Service or Repair Proper Disposal to Protect the Environment TWO-YEAR Warranty