Black & Decker F855S manual Preparing, Your Iron

How To Use

PREPARING	IMPORTANT: Follow this procedure to clean the
YOUR IRON	iron and to become familiar with its features.
	1.	Remove any labels, stickers, or tags which
		may be attached to the body or soleplate of
		the iron.
	2.	Fill Water Tank about 1/3 full with water.
		(See “Filling With Water,” page 6.)
	3.	Plug iron into a standard polarized electrical
		outlet.
	4.	Set the Heat/Fabric Dial to the Cotton/Linen
		setting and preheat for about 2 minutes.
		(See “Starting The Iron,” page 6.)
	5.	Iron on an old cotton terry cloth towel for
		about two minutes, and use each of the
		iron’s features.
		Surge of Steam: Pump the Surge of Steam
		Button every 5 seconds to see the amount of
		steam that will be generated.
		Steam Settings: Turn the Steam Control to
		the	(light),	(medium), and
		(heavy) settings to become familiar with the
		different amounts of steam at each setting.
	6.	Use the Self-Cleaning feature as described
		on page 10.
	7.	Plug the iron in and place on its Heel Rest.
		Heat for about 2 minutes to dry out any
		remaining water after Self-Cleaning.

5