Black & Decker AS255 manual How to Use, Getting Started, Ironing with Steam

Product may vary slightly from what is illustrated.

Symbols

How to Use

This appliance is for household use only.

GETTING STARTED

Remove any labels, stickers or tags attached to the body or soleplate of the iron. Note: Use ordinary tap water for ironing. Do not use water processed through a home softening system.

Important: For optimum performance, let the iron stand for 90 seconds before beginning to iron.

IRONING WITH STEAM

Filling Water Tank

1. Open the water-fill cover (A).

A

2.Tilt the iron and using a clean measuring cup, pour water into opening until the water reaches the MAX level mark on the water tank (B). Do not overfill.

3.Close the water-fill cover.

B

1.	Spray nozzle
2.	Water-fill cover
3.	Dry/steam selector
4.	Spray button
5.	Steam button
6.	Temperature-ready and auto shutoff light
7.	Comfort Grip™ handle
8.	360° pivoting cord
9.	Heel rest

Steam

Spray

Dry

C

D

4. Plug in the iron. The temperature-ready light glows (C).

Tip: If unsure of a garment’s fiber, test a small area (on an inside seam or hem) before ironing.

5.Move the dry/steam selector to the desired steam level (D).

10.	Fabric-select dial
11.	AUTO CLEAN® button
12.	Water tank
13.	Soleplate

6. Turn the fabric-select dial to appropriate steam setting (between 4 and 6) for your fabric (E). Read garment’s label to help you determine fabric type.

• The temperature-ready light glows until it reaches the appropriate temperature.

E • It then glows on and off during ironing. This is normal.

7.When finished ironing, turn the fabric-select dial to lowest

heat setting, move the dry/steam selector to and unplug the iron.

3

4