Product may vary slightly from what is illustrated.
How to Use
This appliance is for household use only.
GETTING STARTED
•Remove any labels, stickers or tags attached to the body or soleplate of the iron.
•Please go to www.prodprotect.com/applica to register your warranty.
Note: Use ordinary tap water for ironing. Do not use water processed through a home softening system.
Important: For optimum performance, let the iron stand for 90 seconds before beginning to iron.
FILLING WATER TANK
1.With the iron unplugged and the steam button locked in the DOWN position, use a clean measuring cup and pour water into the
| needed. |
| 2. Plug in the iron and let it stand on its heel rest. The |
A | power indicator light will turn on. |
SELECTING TEMPERATURE
ENGLISH
B |
1.Use the fabric guide on the iron to select the proper temperature setting for the fabric (B).
Tip: If unsure of a garment's fiber, test a small area (on an inside seam or hem) before ironing. If there is a brown buildup on the soleplate, lower the setting and/or reduce starch.
1. | |
2. | Temperature selector |
3. | Steam button |
4. | Pivoting cord |
5. | Power indicator light |
6. | Heel rest |
7. | Fabric guide |
8. | Water tank |
| 2. Once you determine the fabric type, set the | |
| temperature selector to the appropriate setting for | |
| your fabric (C). Once the iron reaches the selected | |
C | temperature, the power indicator light will turn off. | |
The light will cycle on an off during ironing. | ||
|
3.When finished ironing, place iron on its heel rest, turn temperature selector to OFF and unplug the iron.
3-WAY AUTOMATIC SHUTOFF
The automatic shutoff feature in your iron works as follows:
9. | Button groove |
10. | Soleplate |
30seconds
8 minutes
D
• Once the iron reaches appropriate temperature, it will turn off after 30 seconds of inactivity if left on its soleplate or tipped over on its side. If left vertically on its heel rest, it will shut off after 8 minutes (D).
•As soon as you pick up the iron, it will start heating again. Wait for iron to reheat completely before resuming operation.