How To Use

PREPARING IMPORTANT: Follow this procedure to clean the iron

THE IRON before first use and to become familiar with its features.

1.Remove any labels, stickers, or tags which may be attached to the body or soleplate of the iron.

2.Fill the Water Tank about 1/3 full with water (approx- imately 2 oz.). (See “Filling With Water,” page 6)

3.Plug the iron into a standard 120V (polarized) electri- cal outlet.

4.Set the TEMPERATURE SELECTOR DIAL to the Cotton or Linen settings (6 or 7). Press the PUSH ON Button and the light will come on. Preheat for about 2 minutes. (See “Starting The Iron,” page 6)

5.While ironing on an old cotton terry cloth towel for about two minutes, try using each of the iron’s fea- tures being careful to avoid placing hands or face near the steam vents:

SPRAY: Turn the SPRAY/SURGE Button so that the Spray faces the INDICATOR MARK. Pump the SPRAY Button a few times to see the amount of water that is released.

SURGE OF STEAM: Turn the SPRAY/SURGE Button so that the Surge faces the INDICATOR MARK. Pump the SURGE Button a few times to see the blast of steam that comes out. This will also activate the SurgeClean™ feature that will help clean the steam vents.

STEAM SETTINGS: Turn the ADJUSTABLE STEAM/DRY

DIAL to the INDICATOR MARK for (light), (medi-

um), and (heavy) settings to become familiar with the different amounts of steam at each setting.