10.Do not use unit where
11.Unit is only meant to be used with recommended Compact Fabric Steamer model
12.If Heating Indicator Light does not illuminate when unit is plugged in, unit is not operating normally. Immediately disconnect cord from power supply, then refer to troubleshooting guide on Page 9 of this manual for assistance.
13.Always check that power cord is unplugged and unit is sufficiently cool (allow at least 5 minutes of cooling time after use) before filling Boiler with water. Do not attempt to use unit without properly filling Boiler.
14.When filling Boiler, only water should be used in unit – other cleaning agents could damage unit or cause injury. Distilled or
15.To reduce risk of contact with hot water emitting from Steam Nozzle, check appliance before each use by positioning it away from body and turning it on. Do not operate unit if Steam Nozzle is blocked.
16.Burns can occur from touching hot plastic parts, hot water, or steam. Do not touch Steam Nozzle or attempt to connect any accessories while unit is in use. Use caution when you turn unit
17.When steaming any material for the first time, it is recommended that you consult the manufacturer’s guidelines for the fabric being steamed. For items in question, test on an inconspicuous area before proceeding.
18.Synthetic materials (such as 100% nylon or polyester) are sensitive to heat, and my be damaged by exposure to hot steam. Steam is recommended for use only on natural fibers such as cotton, linen or wool, as well as nylon or polyester blends.
19.Do not allow power cord to touch hot surfaces during use. Loosely bundle cord when storing.
20.Always allow Compact Fabric Steamer to cool (15 minutes for complete cooling) and empty Boiler before storing.
SAVE THESE INSTRUCTIONS!
FOR HOUSEHOLD USE ONLY
Questions or comments?
•www.steamfast.com
•consumerservice@steamfast.com
•
Speak your mind! We invite you to review this product online:
www.steamfast.com/reviews
3