Vornado SF-510 warranty Assembling Your Everyday Fabric Steamer, Telescopic Pole

Assembling Your

Everyday Fabric Steamer

TELESCOPIC POLE

The Telescopic Pole is made up of four sections (FIGURE 1):

•TOP (SECTION 1)

•MIDDLE-TOP (SECTION 2)

•MIDDLE-BOTTOM (SECTION 3)

•BOTTOM (SECTION 4)

FIGURE 1

SECTIONS 1, 2 & 3 are adjustable in length. By using the three extension locks, these sections may be extended or retracted in order to achieve the desired length. Refer to Adjusting Telescopic Pole section on Page 7 for more details.

NOTE: SECTION 4 (BOTTOM) is the widest section of the Telescopic Pole. This is the section that fits into the Pole Base.

CONNECTING TELESCOPIC POLE

1.Make sure Pole Base coupling is loosened – rotate it counter-clockwise if necessary.

2.Look down inside Pole Base, and locate two guide ridges (FIGURE 2-A). Align guide grooves on Telescopic Pole (FIGURE 2-B) with guide ridges inside Pole Base.

3.With guide grooves aligned with guide ridges, insert SECTION 4 of Telescopic Pole into Pole Base (FIGURE 2-C).

NOTE: If you have trouble locating two guide ridges inside Pole Base, insert SECTION 4 of Telescopic Pole into Pole Base, then twist pole to properly align the guide grooves and guide ridges.

4.Screw coupling clockwise to lock Telescopic Pole

in place (FIGURE 2-D). Telescopic Pole should now be secured to the Pole Base.

2-A

2-B

2-C

2-D

FIGURE 2

6 ENGLISH