The tumble dryer must be installed in a clean place, where dirt does not build up.
Door reversal
To make it easier to load or unload the laundry the door
P0281 |
Important |
Make sure there are no obstructing items or material near the
can be reversed.
This operation must be carried out by qualified personnel.
Operate as follows:
- | Remove the door by unscrewing the two screws (1) |
| fastening the hinge to the cabinet (Fig. A). |
- | Remove the safety catch (2) by pressing it downwards |
| (Fig. A) and refit it on the opposite side of the door. |
- | Using a screwdriver, remove screws (3), plastic plate (4) |
| and plug (5), see picture A. Take care not the damage |
When operating the tumble dryer, the room temperature must not exceed 35°C, as it may affect the performance of the appliance.
To save energy, the room temperature should not be lower than +15°C.
the cabinet. |
Refit them on the opposite side (Fig. B) |
- Refit the door by screwing in the two screws (1) which |
fasten the door to the cabinet (Fig. B). |
Levelling
Level the tumble dryer into place by screwing or unscrewing the front feet as required.
Accurate levelling will keep vibration and noise to a minimum when the dryer is in use.
P0046 |
2
P0883
5
134
A
5 |
|
|
4 | 3 | 2 |
1 |
P0884 | B |
|
10