Technics SA-DX950, SA-DX1050 manual Troubleshooting guide, Common problems, DSP sound modes, Radio

Page 29

Troubleshooting guide

Before requesting service, make the below checks. If you can’t fix the system as described below, or if something not listed here occurs, refer to the enclosed directory to locate an Authorized Service Center convenient to you or contact your dealer.

Common problems

Ref.Pages

 

 

No power.

No sound.

Cannot select “DIGITAL” input.

Sound stops. “OVERLOAD” appears on the display.

“F 70” appears on the display.

The picture doesn’t appear on the television.

¡Ensure the AC mains lead is connected.

¡Turn the volume up. ¡Turn muting off.

¡Check connections to speakers and other equipment. ¡Turn on the speakers.

¡Turn off the tape monitor. ¡Select the correct source.

¡Change the DIGITAL input setting to suit the type of connection you have made.

¡Check that the digital signals can be decoded by this unit. ¡Turn PCM FIX or DTS FIX off.

¡Cancel “DSP DEFEAT”.

¡Switch off the unit, determine and correct the cause, then switch the unit on. Causes include shorting of the positive and negative speaker wires, using speakers with an impedance lower than rated for this unit, straining of the speakers through excessive volume or power, and using the unit in a hot environment.

¡Use speakers with the right impedance rating.

¡Turn the unit off, disconnect the AC mains lead, then reconnect and turn the unit on. Consult your dealer if “F 70” remains on the display.

¡Change the television’s input mode to suit the connections between this unit and the television.

9

18

21

6–11

18

21

18

12–13

16

16

22

10–11

 

 

DSP sound modes

Ref.Pages

 

 

 

 

 

 

 

 

Sound is not heard from the

 

¡Ensure the size settings for your speakers are correct.

12–13

center, surround, or subwoofer

 

¡Check the DSP sound mode.

16–17

speakers.

 

¡Cancel “DSP DEFEAT”.

22

DSP sound modes cannot be

 

¡Cancel “DSP DEFEAT”.

22

 

¡Turn SPEAKERS B off.

19

selected.

 

 

¡Turn DVD 6CH INPUT off.

19

 

 

 

 

 

 

 

 

 

 

 

 

Radio

Ref.Pages

 

 

 

 

Reference

The radio cannot be tuned in or there is a lot of noise and interference.

The correct AM frequency cannot be turned in.

¡Adjust the position of the FM or AM antenna. ¡Reduce the treble.

¡Select “DSP DEFEAT”.

¡Turn off nearby televisions, video decks, DVD players, and satellite receivers. ¡You may need an outdoor antenna or an antenna with more elements. ¡Separate the antenna from other cables, leads, and appliances.

¡Change the frequency step. Hold [BAND] down for 10 seconds to change the step to 9 kHz.

8–9

20

22

22

8–9

22

29

RQT5802

Image 29
Contents AV Control Receiver Table of contents Before use Supplied accessoriesSafety precautions EB area code model only How to replace the fuseBefore use Display section Control reference guidePS, RT, PTY, EON FIXED, PCM DIGITAL, % PRO LogicConnections Connecting video equipmentConnecting digital equipment Connecting audio equipmentChanging the digital input settings ConnectionsConnections Antenna connectionsFM antenna AM loop antennaConnecting the AC mains lead and other information Speaker connections Placement of speakersConnecting speakers Center speaker Speaker impedance 6-16ΩSurround speakers SubwooferCustomizing your receiver Setting descriptionsDR Comp Dynamic range compression Input Digital inputRepeat steps 3 and 4 to complete the necessary Settings Change the settings a belowChanging the settings Basic stepsSpeakers A, B For front speakers with an impedance under 6 ΩPreparations Adjusting speaker output levelSurround mode Stereo modeChanging the recognition mode DSP sound modesSFC modes OperationsEnjoying the sounds Enjoying the sounds Press DVD 6CH InputPress B Using headphones Adjusting the tone and balanceUsing the VCR 2 terminals Using the Tape Monitor Muting the volumeAdjusting the subwoofer level Direct tuning Manual tuningRadio Press TUNER/BANDPress Preset Preset tuningPress Tuning 2 or FunctionsPTY search RDS broadcasts Only for EuropeTo display RDS information To cancel EON tuning EON tuningPress BAND, EON PTY displaysRecording on a tape or MD deck Or VCR Making a recordingSetting the timers Timer functionPress TIMER, -MODE, -TIME to select the desired timer mode ReferencePress -HELP, -RESET MaintenanceHelp function If the surfaces are dirtyCommon problems Troubleshooting guideDSP sound modes RadioSpecifications DIN 45 Memo Varoitus

SA-DX1050, SA-DX950 specifications

The Technics SA-DX950 and SA-DX1050 are two prominent models in the world of home audio receivers, designed to deliver exceptional performance and versatility for audiophiles and casual listeners alike. Both models reflect Technics' long-standing commitment to high-quality sound reproduction and innovative technology.

The SA-DX950 features advanced digital signal processing (DSP), which allows it to decode a variety of audio formats, enhancing the listening experience with exceptional clarity and detail. This model includes a built-in 5.1-channel amplifier, delivering robust power to drive a wide range of speakers, making it suitable for both music and home theater applications. With its THX certification, the SA-DX950 ensures that audio output meets rigorous standards set for high-fidelity surround sound, bringing cinema-like experiences into the home environment.

The SA-DX1050, while sharing many traits with the SA-DX950, is designed with even more advanced features. It boasts a higher power output and improved audio processing capabilities, assuring listeners a more immersive and dynamic soundstage. The model supports various surround sound formats, including Dolby Digital and DTS, which further enhances its ability to present engaging audio for movies, music, and games.

One of the standout characteristics of these models is the incorporation of Technics' proprietary digital amplifier technology. This technology minimizes distortion and maximizes efficiency, allowing for pure sound reproduction without the bulkiness typically associated with traditional amplifiers. Additionally, both receivers provide multiple inputs, enabling users to connect various devices such as CD players, DVD players, and gaming consoles seamlessly.

Another notable feature is the user-friendly interface, which simplifies navigation through the receiver's multitude of settings and options. The remote control further enhances this convenience, making it easy to adjust settings from a distance.

In conclusion, the Technics SA-DX950 and SA-DX1050 are exceptional audio receivers that embody cutting-edge technological advancements and superior sound quality. With their powerful amplification, robust surround sound capabilities, and user-friendly design, they are ideal choices for anyone looking to elevate their home audio experience. Whether for music, movies, or gaming, these receivers deliver an impressive and immersive sound that meets the highest expectations of audio enthusiasts.