Silvercrest SDB 2000 A1 Troubleshooting, Technical Data, Disposal, Casing, Metal Parts

Page 8

Casing

Danger of injury!

Pull the mains power plug before cleaning. There is a risk of electrical shock! Allow the device to cool off. Danger of burning!

Clean the casing only with a soft dry cloth.

Do not use aggressive or chemical cleaning agents.

Metal Parts

Clean the metal parts with a cloth slightly moistened with water and a mild, non-foaming cleaning agent.

Troubleshooting

The steam iron puts out only little or no steam

The water reservoir in the steam iron is empty. Fill the water reservoir with tap water (see "Filling with Tap Water“).

The steam iron does not get hot

The steam iron is not plugged in or not switched on. Plug the power plug into the power socket and set the temperature control a to the desired temperature.

The steam iron is defect. Have the defect steam iron repaired by qualified technicians.

Technical Data

Power Supply Voltage:

220 - 240 V~/50 Hz

Output:

1600 - 2000 W

Disposal

Do not dispose of the appliance in your normal domestic waste. This product is subject to the European guideline 2002/96/EC.

Dispose of the appliance through an approved dis- posal centre or at your community waste facility. Observe the currently applicable regulations.

In case of doubt, please contact your waste disposal centre.

Dispose of all packaging materials in an environmentally responsible manner.

- 6 -

Image 8
Contents Steam Iron SDB 2000 A1 SDB 2000 A1 Content Never touch the cord or the power plug with wet hands Basic Safety InstructionsOnly pull on the power plug and never on the cord Proper use Items suppliedBefore the First Use Operating ElementsSteam Ironing SymbolPlugging In and Ironing Setting the Steam Iron Temporarily Aside CleaningIroning with Steam Spray Putting the Steam Iron Away After UseTroubleshooting Technical DataDisposal CasingMail support.ie@kompernass.com Warranty & Service ImporterYour goods be assured