840158400 Ev02.qxd 1/3/07 11:09 AM Page 6
Features
Auto Shutoff Reset Button
This light comes on when the iron is first plugged in. After 15 minutes, the iron will shut off and the light will go out. Push the Reset Button to turn the iron back on for another hour of ironing.
Power ON Light and
Auto Shutoff Light
This light comes on when the iron is plugged in and remains on until the iron is unplugged. The light stays on even if Temperature Control Dial is turned to Off.
This light also functions as the Auto
Shutoff Light.
Spray and Blast of Steam Buttons
Push Blast Button for an extra blast of steam. Do not press Blast Button more than every 5 seconds. Push Spray Button to release a fine spray of water for difficult wrinkles in cotton or linen.
Caring and Cleaning
Iron
1.Turn Temperature Control Dial to Off ( O ). Unplug and let cool. The iron takes longer to cool down than it does to heat up.
2.To empty water from iron, slowly tilt pointed end of iron down over a sink. Water will run out of water tank opening.
3.Wrap cord loosely around iron and store iron in an upright position. Do not store iron laying flat on soleplate.
Soleplate
1.Never iron over zippers, pins, metal rivets, or snaps, as these may scratch the soleplate.
2.To clean occasional
3.Always store iron upright in the heel rest position.
Self-Clean
To keep the steam vents clear of any
1.Turn Temperature Control Dial to OFF ( O ) and set
Adjustable Steam Switch to Dry Iron 
. Fill iron with water to 1⁄2 of its maximum capacity.
2.Turn Temperature Control Dial to Linen setting and let iron
heat for 2 minutes in the heel rest position. Keep Adjustable Steam Switch on Dry Iron 
.
3.Turn Temperature Control Dial to OFF ( O ). Unplug iron and hold over a sink with soleplate facing down.
6 | 7 |