Smartek ST-2000 manual HOW to USE AS a Steam Iron, HOW to USE the Spray, HOW to USE AS a DRY Iron

HOW TO USE AS A STEAM IRON

1.Fill the iron as described in “HOW TO FILL WITH WATER”.

2.Position the iron vertically and turn the Temperature Control Dial to the steam position.

3.Plug the AC Cord into the electrical outlet.

4.Set the Temperature Control Dial to the steam position.

5.Preheat the iron until the indicator light goes out, usually about 1-2 minutes.

Now steam ironing can begin.

HOW TO USE THE SPRAY

Before using the spray feature, check the fabric label for ironing instructions because some fabrics may be spotted or stained with moisture.

The spray feature is particularly helpful for removing stubborn wrinkles and where extra dampening is needed.

The spray may be used with steam or dry ironing.

Simply pump the Spray Mist Button when spray is desired.

HOW TO USE AS A DRY IRON

1.Position the iron vertically.

2.Plug in the iron.

3.Set the Temperature Control Dial to “MIN” position

Refer to the Fabric Ironing Chart in this manual on page # 12

4.Preheat the iron until the indicator light goes out, usually about 1-2 minutes.

Now dry ironing can begin.

8