Smartek ST-2000 manual Cord Ironing

Page 9

Cord Ironing

1.Turn the cord switch to “Cord”

2.Lift the iron (with cord) from the stand

.

NOTE: The indication light will turn on and off from time to time during the cord ironing.

Cordless Ironing

1.Turn the Cord to switch to “Cordless”

2.Lift the iron (without the cord) from the stand.

To assure that the iron reaches the present temperature:

1.Place the iron in its suitable position on the stand for heating.

2.Do not lift the iron until the indication light turns off.

3.To reheat the iron place it back onto the stand

4.Do not use cordless ironing longer than two minutes.

Note: When using a lot of cordless ironing the soleplate temperature will go down very quickly. The ironing result may not be so good. Thus we suggest cord ironing when ironing thick clothes

CAUTION

Placing the iron on the stand

The correct way is indicated in Fig. #1

The incorrect way is indica ted in Fig. # 2

9

Image 9
Contents Cord/ Cordless Steam Iron Safe USE of the Iron Important Safety InstructionsRead ALL Instructions Before Using the Iron To reduce the risk Electric shock or fire Special InstructionsComponents Identification Helpful Ironing Tips Low TemperatureHOW to Fill with Water HOW to USE AS a Steam Iron HOW to USE the SprayHOW to USE AS a DRY Iron Cord Ironing Soleplate After Each USELOW Fabric Ironing ChartDistributed By