Sunbeam 3010, 3030, 3020 manual Dry Ironing

Page 9

Dry Ironing

1 . Make sure that the Steam Control is set to OFF.

2.Plug the cord into a 102-Volt AC outlet. The Power Indicator will light.

3.Turn the Fabric Select dial to the Dry ironing fabric setting you desire (Silk or Synthetics) and allow the iron to heat for 2 minutes. While the Iron is heating, make sure it is sitting on its heel rest on a stable, protected surface.

Tip: Refer to the Ironing Guide on Page 16 for the recommended setting for your fabric.

Steam Ironing

1 . Follow the instructions for “Filling the Water Reservoir” on Page 5.

2.Plug the cord into a 120.Volt AC outlet. The Power Indicator will light.

3.Turn the Fabric Select dial to the Steam ironing

fabric setting you desire (Linen, Cotton or Wool) and allow the iron to heat for 2 minutes.

While the iron is heating, make sure It is sitting on its heel rest on a stable, protected surface.

Tip:	Refer to the Ironing Guide		on Page 16
for	the recommended	setting for	your fabric.

4.After the iron has heated (2 minutes), turn the Steam Control to ON.

7

Image 9

Contents Page Read ALL Instructions Before USE Special Instructions Models 3020 & 3030 only Welmme Sunbeam Simple Press’ irons offer the following features‘.., ?‘ Filling the Water Reservoir Page Dry Ironing To use the Spray MIST@ feature To Use the Shot of Steam FeatureShot of Steam Model 3030 only To use the vertical steam Vertical Steam Model 3030 onlyPatented Motion SMART’ Auto-Off Important The Power indicator will continueIf you leave the iron To blink until the iron is unpluggedStoring Your Iron For YoUter 1 Jse Turning Off Your IronLq Your Trnn Cleaning the SoleplatePage Page Ironing Tips Ironing Guide Fabric Steam Setting Fabric Setting Ironing RecommendationsYear Imuted Warranty Consumeraffairs@consumer.sunbeam.com 800PO BOX Do not send product to the above addressPage Medidas DE Seguridad Guarde Estas Instrucciones Cómo Usar las Funciones Especiales de la Plancha Cómo PlancharCómo Cuidar la Plancha Después del Uso Mantenimiento de la PlanchaIfelicitaciones por la Compra de su Plancha SUNBEAM@ ’718 ,, ,,... + E Cómo llenar el Depósito de Agua Cierre la tapa del depósito de agua Planchando al Vapor Planchando en SecoA s Para usar la función Spray MIST?Para usar la función Shot of STEAM? Para usar el Vapor Vertical Motion Smarp Función de Apagado AutomáticoCómo Guardar la Plancha Cómo Apagar la PlanchaUso de la Función de Limpieza Automática Mantenlmlentra Limpieza de la Placa de BasePara limpiar la Placa de Base Para usar la Función de limpieza AutomáticaPage Page Recomendaciones para el Planchado Recbs y Giua de PL a Guía de PlanchadoDe IJn Año 800458-8407