Sunbeam 3020, 3010, 3030 manual Cleaning the Soleplate, Lq Your Trnn

Clean the soleplate if starch or other residue

accum11latc.

To clean the Soleplate:

1 . Allow the iron to cool and then wipe it with a soft, damp cloth.

WARNING: DO Not use abrasive cleansers, scouring pads or vinegar to clean the soleplate, this will damage the finish.

2. Run the iron over an all-cotton cloth to remove any residue.

Using the Self-Cleaning Feature

You should use the self-cleaning feature to maintain the optimal performance of your iron. The self-cleaning feature will clean the water reservoir and steam vents of accumulated minerals, dust and lint.

In general, clean the iron:

. if the steam vents clog up, or

. once a month if you have hard water, o r

. once every two months if you have soft water

To use the self-cleaning feature:

1 . Make sure that the Steam Control and the Fabric Select dial are set to OFF.

12