Panasonic NA-F62B1, NA-F70B1 How to use liquid detergent, How to use bleach, How to use softener

Page 7

How to use liquid detergent

Put in the liquid detergent according to the water level into the bleach / liquid detergent inlet.

Bleach / Liquid Detergent Inlet

[NOTE]

Liquid detergent, like powdered detergent is not easily dissolved and can leave scum along the inside of the washing tub, so be sure to rinse thoroughly.

How to use bleach

Liquid bleach

Dilute fully with water and pour in before pressing [START/HOLD].

Bleach / Liquid Detergent inlet

Powder bleach

• Place directly into the tub during fill.

• Follow the instruction on the bleach container.

How to use softener

Adding softener

Please put it in before beginning the wash.

Because the (Concentrated) type is sticky and adheres to the opening, dilute with 3 times the amount of water.

Pour it in slowly. When it is difficult to add, turn the wash tub to the right to locate the Softener Inlet in a more convenient position (see the following clause for details), or release the cassette case from the Balancer case and pour into it.

Cassette case can be removed by pulling the top toward inside.

Softener Inlet

Balancer case

Cassette case

Table of softener quantities

(Normal) ..............20 ml softener per 30L of water.

(NA-F70B1)

Water level

51L

41L

30L

16L

 

 

 

 

 

 

 

Normal

Approx.

Approx.

Approx.

Approx.

 

34ml

27ml

20ml

11ml

Softener

 

Concentrated

Approx.

Approx.

Approx.

Approx.

 

 

11ml

9ml

7ml

4ml

 

 

(Concentrated) ... 6.6 ml softener per 30L of water. (NA-F62B1)

Water level

45L

35L

30L

16L

 

 

 

 

 

 

 

Normal

Approx.

Approx.

Approx.

Approx.

Softener

30ml

23ml

20ml

11ml

 

Concentrated

Approx.

Approx.

Approx.

Approx.

 

10ml

8ml

7ml

4ml

 

 

[Please note]

Please do not let the softener sit in the water for a long time.

Please do not open the lid during the spin cycle. If the lid is opened, softener will be added too early and then its effectiveness will decrease.

If rinsed water is used, results will not be as effective.

Softener is automatically added to the tub at the end of the rinse cycle.

When putting the softener in or removal of the lint filter is difficult.

The wash tub can be turned lightly to a convenient position.

How to turn the wash tub.

1.Push the power switch on.

2.After 15 seconds with a sound “click”, rotate the wash tub.

[NOTE]

The wash tub does not rotate while filled with water.

The wash tub does not rotate after pushing the [START/HOLD] button.

The water filled after 15 seconds is drained automatically.

7

NA-F62-70B1-ENABPS.indd 7

5/8/08 9:16:30 AM

Image 7
Contents Thank you very much for purchasing Panasonic Washing Machine Model No. NA-F70B1Contents Do not place the washing machine on Safety & General PrecautionsMay cause a serious injury or death Never disassemble, repair or remodel this washing machineDo not wash and spin waterproof sheets and garments Do not use water with temperature above 50CName of parts AccessoriesProcedures before washing Check the installationLaundry Detergent Detergent indicatorTable of softener quantities How to use liquid detergentHow to use bleach How to use softenerLaundry Tips How to use powdered synthetic detergentsHow to use powdered detergent Economy’’ LaunderingOperations Panel Water Level Water volume displaySpeedy Course Normal CourseDetergent according to the water level Delicate CourseReserve Program 9 hours Delicate CourseChild Lock program Cancelling end buzzer after washingMaintenance Process settingsUpper part of the tub Water supply hose filterLint filter Main unit and tubPlease observe the following Instructions Power cord How to installInstall Washing Machine Horizontally PlacementHose extension Connect the water supply hosePurpose Bottom Cover Installation InstructionHow to install Bottom Cover to the Base To change the drain hose to oppositeFollowing symptoms are not trouble TroubleshootingSpecification Error IndicationNA-F70B1 NA-F62B1