Sunbeam 4042 Cleaning the Soleplate, Using the Self-Cleaning Feature, To clean the Soleplate

maintenanceMaintaining Your EURO PRESS™ Iron

Cleaning the Soleplate

Clean the soleplate if starch or other residue accumulate.

To clean the Soleplate:

1.Allow the iron to cool and then wipe it with a soft, damp cloth.

WARNING: DO NOT use abrasive cleansers, scouring pads or vinegar to clean the soleplate, this will damage the finish.

2.Run the iron over an all-cotton cloth to remove any residue.

Using the Self-Cleaning Feature

You should use the self-cleaning feature to maintain the optimal performance of your iron. The self- cleaning feature will clean the water reservoir and steam vents of accumulated minerals, dust and lint. In general, clean the iron:

•if the steam vents clog up, or

•once a month if you have hard water, or

•once every two months if you have soft water.

To use the self-cleaning feature:

1.Set the Steam Dial to ZERO and the Fabric Select Dial to MIN.

11