maintenance
2.Fill the water reservoir with tap water to the “MAX” line.
3. Set the Fabric Select Dial to LINEN.
4.Plug the iron into a power outlet and allow
the iron to heat for 2 minutes.
5. Turn the Fabric Select Dial to MIN and unplug the iron.
6.Hold the iron over a sink in a horizontal
position.
WARNING: Be careful not to touch the iron’s hot surfaces.
7.Press the
tank, slowly rock the iron side to side and front to back for 30 seconds. When rocking the iron, dip the nose of the iron slightly below the rear of the iron to make certain the water circulates completely. Release
one minute.
12