VOLTAGE
Be sure the dual voltage selector is in the correct position before operating.
In North America the voltage selector switch should be placed in the 120 volt position. This appliance was set at the factory to operate at 120 volts (See Figure 1).
.
.. * ..
HANDLE
To unlock the handle, press the handle release bar (See Figure 2). The handle will automatically rise to the upright position and lock into place.
W ATER FILL
IMPORTANT: Always turn the fabric select dial to OFF and disconnect iron from electrical outlet before filling or emptying the water tank.
‘SL?
b
FIGURE 1
FIGURE 2
Slide the water tank release button backwards (See Figure 3) and hold into position with one hand. Lift water tank to remove from iron with the other hand (See Figure 4).
FIGURE 3