Specifications
Electrical Requirements | 120 | V~ / 60 Hz / 0.27A |
|
|
|
Maximum Flow | 317 | Gallons per Hour |
|
| |
Power Cord | 18AWGX3C | |
|
|
|
Unpacking
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Operating Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
WARNING Do not use any highly volatile, flammable or combustible solvents, or fuels such as gasoline, diesel, or toluene. Use only
WARNING Parts being cleaned may contain and leave flammable or combustible residue or fluids in the Parts Washer. Check for solvent fumes to verify nonflammability and
1.Place the Parts Washer in a well ventilated area on a surface capable of bearing the combined weight of the unit, solvent, and parts.
2.Read all manufacturer directions for the solvent and follow the guidelines for use.
3.Add the correct solvent for the application at hand until the Pump (3) is entirely submerged.
4.Carefully place the Shelf (2) into the Solvent Bin, and place the parts to be cleaned on the Shelf (2).
5.Plug the Parts Washer into a grounded 120V electrical outlet. Wearing protective gear, turn the Power Switch on, and direct the Spigot (1) to clean the products.
WARNING This Parts Washer is intended for use only as a plastic (polystyrene) parts cleaner only. Do not use this product to clean other ma- terials. Solvents used to clean other materials could chemically react with the components of this machine and cause an explosion.
REV 08j
SKU 96952 | For technical questions, please call | Page 8 |