6.Do not pour undiluted liquid bleach directly into the load or drum.
?OPERATING INSTRUCTIONS
PRESS DOWN POWER BUTTON.
Press once to turn the washing machine ON, press again to turn the washing machine OFF. After the washing program has been finished, the power will automatically turn off.
NOTE: If the power is left ON for longer than 10 minutes without any buttons being touched, the power will turn off automatically.
PRESS DOWN FABRICS BUTTON.
Choose the right available program according to wash load as following:
COTTON
PERM PRESS 
DELICATES 
KNIT/WOOL The default Fabrics is Perm Press.
For different FABRICS program, there are different default water temperature and cycle process as following:
FABRICS | WATER | CYCLE |
| TEMPERATURE |
|
COTTON | HOT/COLD | WASH+RINSE+SPIN |
PERM PRESS | WARM/COLD | WASH+RINSE+SPIN |
DELICATES | WARM/COLD | WASH+RINSE+SPIN |
KNIT/WOOL | COLD/COLD | WASH+RINSE+SPIN |
PRESS DOWN CYCLE BUTTON.
Press the button repeatedly to select the available wash process as following:
WASH+RINSE+SPIN
PREWASH+WASH+RINSE+SPIN
SPIN 
RINSE+SPIN
WASH+RINSE
The default cycle is WASH+RINSE+SPIN.
NOTE: Prewash is only available when washing COTTON and PERM PRESS.
PRESS DOWN WASH/RINSE WATER TEMPERATURE BUTTON.
Press down the water temperature selection button, you can choose to inlet cold water or hot water for the wash and rinse process as following:
HOT/COLD
WARM/WARM
WARM/COLD
COLD/COLD The default water temperature is WARM/COLD.
NOTE: HOT/COLD is only available when washing COTTON and PERM PRESS.
IMPORTANT: A single cold hose system does not allow the washing machine to automatically regulate incoming water temperatures to match those listed on the control panel. Only COLD/COLD can be available.
PRESS DOWN EXTRA RINSE SELECTION BUTTON. Press down the button when Extra Rinse is needed.
When you choose Extra Rinse, you will see the indicator lights up on the control panel.
NOTE: Extra Rinse is not available for Spin only process.
PRESS DOWN DELAY START SELECT BUTTON.
Press this button repeatedly to choose the delayed start time (From 1 to 24 hours in one hour increment).
After the Delay Start has been chosen, the Delay Start indicator flashes and the LED displays the remaining delay time.
To cancel the Delay Start, press down the power button or press down the Delay Start repeatedly to
13