1 |
2
2 |
1
ENGLISH 21
3.Put a container below the recess of the drain pump to collect the water that flows out.
4.Press the two levers and pull for- ward the drainage duct to let the water flow out.
5.When the container is full of water, put the drainage duct back again and empty the container. Do steps 4 and 5 again and again until no more water flows out from the drain pump.
6.Pull back the drainage duct and turn the filter to remove it.
7.Remove fluff and objects from the pump.
8.Make sure that the impeller of the pump can turn. If this does not oc- cur, contact the service centre.
9.Clean the filter under the water tap and put it back in the pump into the special guides.
10Make sure that you tighten correctly
. the filter to prevent leakages.
11Put the flap back and close the
.drain pump door.
THE INLET HOSE FILTER AND THE VALVE FILTER
It could be necessary to clean the filters when:
•The appliance does not fill with wa- ter.
•The appliance fills with the water for a long time.
•The indicator of button 4 flashes and the display shows the related alarm. Refer to 'Trouble shooter and service'.
WARNING!
Disconnect the mains plug from the mains socket.