AEG L 75675 FL, L 75475 FL user manual Installation, Unpacking

Page 26

26

Maximum load

Cotton

7 kg

Spin speed

Maximum

1400 rpm (L 75478 FL)

 

 

1600 rpm (L 75678 FL)

 

 

 

1) Connect the water inlet hose to a water tap with a 3/4'' thread.

INSTALLATION

UNPACKING

1. Use the gloves. Remove the exter- nal film. If necessary, use a cutter.

2. Remove the cardboard top.

3. Remove the polystyrene packaging materials.

4. Remove the internal film.

Image 26
Contents FL L 75675 FL Contents ServiceVisit OUR Website for Accessories and ConsumablesFor Perfect Results General Safety Safety InformationChild Safety Device Care and CleaningPackaging Materials Environment ConcernsDiscard the Appliance Ecological HintsProduct Description ON/OFF Button AccessoriesControl Panel Programme KnobDisplay Time Save Button Delay Start ButtonSTART/PAUSE Button Extra Rinse ButtonProgrammes Temperature ButtonAcoustic Signals Function Permanent Extra Rinse FunctionFLECKEN1 Gardinen Set this programme Prewash Loading the Laundry Using the ApplianceBefore First USE Consumption ValuesUsing the Detergent and Additives Check the position of the flap Setting and Starting a Programme Laundry Load AT the END of ProgrammeHelpful Hints and Tips Detergents and Additives Care and CleaningStubborn Stains Water HardnessDoor Seal External CleaningMaintenance Wash DrumDrain Pump Inlet Hose Filter and the Valve Filter Frost Precautions Emergency DrainTrouble Shooter and Service Problem Possible cause Possible solutionDelay start is set Technical Data ServiceInstallation UnpackingEnglish Positioning and Levelling Inlet Hose Water-stop device Water DrainageWithout the plastic hose guide 132940921-A-492010