AEG W 857 manual Are supplied with it

Page 39

Installation and connection instructions

3	The special spanner (A) and the
	caps (B) (2 each) and (C) (1 each)

are supplied with it.

3. Remove the screw D, including the compression spring with the special spanner A.

4. Cover the hole with the cap C.

Important! When fitting the plastic caps, press until they snap into the rear panel securely.

5.Remove the two screws (E) with

the special spanner (A).

6. Remove the 4 screws (F).

7. Remove the transit bar (G).

8. Screw the 4 screws (F) back in for safe keeping.

9. Close the 2 large holes with the caps (B).

Important! When fitting the plastic caps, press until they snap into the rear panel securely.

39

Image 39

Contents Lavamat W 857 Electronic Please read this user information carefully Dear CustomerContents What to do if Remedying FaultsWarranty conditions / Customer service centres Safety Before Using for the First TimeCorrect Use General Safety Child SafetyDisposal Disposing of the Packaging MaterialDisposing of your old appliance Environmental tips Unit description Front viewDrawer for Detergent and Conditioners Control Panel Programme selectorCOTTONS/LINEN Programme Option Buttons Consumption Values and Programme Times Before the First WashLoad Water Energy Time Sort washing and prepare Prepare washing cycleTypes of Washing and Care Symbols Hardness class How much detergent and care agent?Water softener Water hardness detailsRunning a washing cycle Brief instructionsAfter the washing programme has ended Opening and closing the door Add the washingSTART/PAUSE Or for water softener If using liquid detergents/tabletsAdding detergent/conditioners Compartment for liquid conditionersChanging Spin Speed/selecting oRINSE Hold Setting the washing programmeStarting the Wash Programme Programme ProgressProgramme Progress Display Changing the Spin Speed Changing or cancelling the programmeChanging the washing programme Selecting a programme optionWashing cycle complete/removing the washing Washing Programme TablesSeparate Spinning Separate RinsingDetergent Drawer Cleaning and CareCleaning the drain pump Washing DrumMain door Before cleaning the drain pump Remedying Faults Problem Possible cause RemedyWhat to do if Moved Drain hose is kinked Remove the kink Washing is not Water tap is not fully Open the water tap fully If there are white remnants on the washing If the washing results are not satisfactoryIf there are still grey spots on the washing If at the end of the last rinse foam is still visibleCarrying out emergency drainage To set the additional rinse cycles When the water is completely drainedTo cancel the additional rinse cycles Additional rinse cycles Á+/RINSE+ Child Safety Feature Setting the child safety feature Cancelling the child safety Feature Installation Safety Precautions Installation and connection instructionsInstallation of the appliance Transporting the applianceRemove transport packaging Are supplied with it Prepare the installation place Installation on a concrete baseInstallation on vibrating floors Compensate for floor unevenness Electrical connection Water connectionPermissible water pressure Water inflow Water drain-off inside a basin Water drainDelivery heads over 1m Water drain-off inside a siphonDimensions Technical dataOtros puntos de Postventa en el extranjero Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Weitere Kundendienststellen im AuslandEstonia Latavia Poland Croatia New ZealandBulgaria Kuwait/Arabian Gulf Cyprus Lebanon OmanHungary Israel Malaysia Saudi ArabiaJapan Singapore Slovenia Thailand Slovakia Rep South AfricaPage Index When do you incur costs even during the warranty period? ServiceAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG