AEG L 60460 FL, L 60468 FL, L 60660 FL Before First USE, Using the Appliance, Loading the Laundry

Page 14

14

BEFORE FIRST USE

1.To activate the drain system, put 2 litre of water in the main wash com- partment of the detergent dispens- er.

2.Put a small quantity of detergent in the main wash compartment of the

detergent dispenser. Set and start a programme for cotton at the highest temperature without laun- dry. This removes all possible dirt from the drum and the tub.

USING THE APPLIANCE

1.Open the water tap.

2.Connect the mains plug to the mains socket.

3.Press button 1 to activate the ap- pliance.

4.Put the laundry in the appliance.

5.Use the correct quantity of deter- gent and additives.

6.Set and start the correct pro- gramme for the type of laundry and soil.

LOADING THE LAUNDRY

1.

Open the appliance door.

Make sure not to put too much

2.

Put the laundry in the drum, one

laundry in the drum.

 

item at a time. Shake the items be-

3. Close the door.

 

fore you put them in the appliance.

 

Make sure that no laundry stays be- tween the seal and the door. There is a risk of water leakage or damage to the laundry.

Image 14
Contents FL L 60468 FL L 60660 FL Contents ServiceVisit OUR Website for Accessories and ConsumablesFor Perfect Results Care and Cleaning Safety InformationGeneral Safety InstallationWater connection Discard the AppliancePackaging Materials Environment ConcernsTechnical Information Ecological HintsAccessories Product DescriptionDisplay Control PanelOn OFF Button Programme KnobTime Save Button Delay Start ButtonSTART/PAUSE Button Extra Rinse ButtonChild Lock Function Temperature ButtonAcoustic Signals Function Permanent Extra Rinse FunctionProgrammes Extra SpoelenConsumption Values Programme Energy consumption Water consumpStandard programmes for the Energy Label consumption values Loading the Laundry Using the ApplianceBefore First USE Filling the Detergent and Additives Check the position of the flapInterrupt a Programme Setting and Starting a ProgrammeCancel a Programme AT the END of the Programme SET the Delay StartCancel the Delay Start Change a FunctionPage Stubborn Stains Hints and TipsLaundry Load Detergents and AdditivesLevel Type Water hardness Mmol/l Clarke Care and Cleaning Detergent Dispenser Drain PumpEnglish Inlet Hose Filter Valve FilterFrost Precautions Emergency DrainTroubleshooting Problem Possible cause Possible solutionDelay start is set Problem Possible cause Possible solution Installation UnpackingPull out the plastic spacers Positioning and Levelling Inlet Hose Water-stop device Water DrainagePage English 132933220-A-212011