AEG L 60460 FL, L 60468 FL, L 60660 FL Troubleshooting, Problem Possible cause Possible solution

Page 26

26

TROUBLESHOOTING

The start of the appliance does not oc- cur or it stops during operation.

First try to find a solution to the prob- lem (refer to the table). If not, contact the service centre.

With some problems, the acoustic signals operate and the display shows an alarm code:

• - The appliance does not fill with water.

• - The appliance does not drain the water.

• - The appliance door is open or not closed correctly.

WARNING!

Deactivate the appliance before you do the checks.

Problem	Possible cause	Possible solution
The appliance	The water tap is closed.	Open the water tap.
does not fill with
water.
	The water inlet hose is	Make sure that the water inlet
	damaged.	hose has no damages.
	The filters in the water in- Clean the filters. Refer to 'Care
	let hose is blocked .	and cleaning'.
	The water tap is blocked	Clean the water tap.
	or is furred with lime-
	scale.

The connection of the water inlet hose is not correct.

Make sure that the connection is correct.

The water pressure is too low.

Contact your local water authori- ty.

The appliance	The water drain hose is	Make sure that the water drain
does not drain the	damaged.	hose has no damages.
water.

The filter of the drain pump is blocked.

Clean the filter of the drain pump. Refer to 'Care and clean- ing'.

The connection of the water drain hose is not correct.

Make sure that the connection is correct.

A washing programme	Set the drain programme.
without the drain phase
is set.
The function Rinse &	Set the drain programme.
Hold is on.
The appliance	Close the door correctly.
door is open or
not closed correct-
ly.

Image 26

Contents FL L 60468 FL L 60660 FL Contents ServiceVisit OUR Website for Accessories and ConsumablesFor Perfect Results Care and Cleaning Safety InformationGeneral Safety InstallationWater connection Discard the AppliancePackaging Materials Environment ConcernsTechnical Information Ecological HintsAccessories Product DescriptionDisplay Control PanelOn OFF Button Programme KnobTime Save Button Delay Start ButtonSTART/PAUSE Button Extra Rinse ButtonChild Lock Function Temperature ButtonAcoustic Signals Function Permanent Extra Rinse FunctionProgrammes Extra SpoelenConsumption Values Programme Energy consumption Water consumpStandard programmes for the Energy Label consumption values Loading the Laundry Using the ApplianceBefore First USE Filling the Detergent and Additives Check the position of the flapInterrupt a Programme Setting and Starting a ProgrammeCancel a Programme AT the END of the Programme SET the Delay StartCancel the Delay Start Change a FunctionPage Stubborn Stains Hints and TipsLaundry Load Detergents and AdditivesLevel Type Water hardness Mmol/l Clarke Care and Cleaning Detergent Dispenser Drain PumpEnglish Inlet Hose Filter Valve FilterFrost Precautions Emergency DrainTroubleshooting Problem Possible cause Possible solutionDelay start is set Problem Possible cause Possible solution Installation UnpackingPull out the plastic spacers Positioning and Levelling Inlet Hose Water-stop device Water DrainagePage English 132933220-A-212011