AEG L 12510 VI, L 14510 VI manual Starting the programme, Programme progress display

Page 26

How to wash

Starting the programme

1.Check that the water tap is open.

2.Press START/PAUSE to start the programme.

If the Delay Start option has been selected the programme will start at the end of the countdown.

At the start of the programme, if the “END” light blinks for few sec- onds and on the display appears E40, that indicates that the door is open. Close the door and press the START/PAUSE button again.

If the delay start option has been selected, the machine starts its countdown, in hours, which will appear on the display. During this period it is possible to load other laundry or cancel the delay time.

•Load other laundry: press the START/PAUSE button. Open the door. Load the laundry. Close the door and press the START/PAUSE button again.

•Cancel the delay time: press the START/PAUSE button. Press the DELAY START button until on the display appears 0’, if you wish to cancel it. Press the START/ PAUSE button again to let the pro- gramme restart.

Programme progress display

By selecting the wash programme, the pilot lights corre- sponding to the various phases making up the programme come on. After the machine has started, only the running phase pilot light stays on.

PREWASH WASH RINSES RINSE HOLD DRAIN

SPIN

CLEAN

FILTER

END

Display

The time to the end of the programme decreases minute by minute and appears on the display.

26

Image 26

Contents Lavamat L 12510 VI Lavamat L 14510 Dear customer Contents Technical data Service & Spare Parts Guarantee Conditions Building-in Installation Safety instructionsGeneral safety Child safety During useMachine DisposalPackaging materials Tips for environmental protection Main features of your washing machine Delay Start delayed startDescription of the appliance Front viewControl panel Programme selector dialMains-on light Delay Start buttonON/OFF button START/PAUSE buttonProgramme Option buttons Spin SpeedPrewash Programme progress display Cancelling a programmeDisplay Altering an option/programme which is running Opening the door after the programme has startedDetergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundryCotton Weight of laundryTypes of fabric and care labels Synthetics Easy-caresDelicates Detergents and additives Which detergent?Which form? Traditional PowdersLoad the laundry How to washSwitching the machine on Add detergent and additiveSelection of the desired option Selection of the Delay Start optionSelection of the desired wash programme Starting the programme At the end of the programme 60E Programme chartWash programmes 40ESpecial programmes Max ConsumptionAfter each wash Cleaning and maintenancePeriodical cleaning ExteriorDoor seal Drain filterEmergency emptying out Frost precautionsWater inlet filter Troubleshooting Something not working?Problem Noisy Feet have not been Problem Possible cause Foam is still visible even after the last rinse Unsatisfactory washing resultsIf grey stains remain on the laundry White residue is left on the laundryTechnical data This appliance complies with the following EC directives08705 929 Service & Spare PartsService & Spare Parts Help us to help youCustomer care Guarantee Conditions Guarantee does not cover commercial useEuropean Guarantee Instructions for installation and electrical con- nection Safety instructions for the installerFront view and side view Rear viewInstallation UnpackingPositioning LevellingDo not connect to a hot water supply Water inlet cold water connection onlyWater drainage Into a drainage standpipePush the drain hose Interest of the environment Electrical connectionsPermanent connection Door Preparation and assembly of the doorBuilding-in Counter-magnet HingesMounting the door Drill four fixing holes see Fig. G Building-inInstallation From the Electrolux Group. The world’s No choice