AEG L 14510 VI, L 12510 VI ON/OFF button, Mains-on light, START/PAUSE button, Delay Start button

Page 13

Description of the appliance

Positions 60E-40Ecorrespond to the ENERGY SAVING programmes for normally soiled cotton laundry, extended washing time. The washing temperature will decrease (cannot be combined with QUICK).

Position COLD = cold wash.

ON/OFF button

Press this button to switch the machine on. Press it again to switch the machine off.

Mains-on light

This light comes on when the ON/OFF button is pressed, and goes out when it is pressed again.

START/PAUSE button

This button has two functions:

a)Start

After having selected the required programme, press this button to start the machine. The relevant pilot light stops flashing and remains static. If you have selected the DELAY START option, the machine starts its hourly countdown.

b)Pause

To interrupt a programme which is running, press the START/PAUSE button: the information on the display remains lit and the START/PAUSE pilot light starts to flash.

To restart the programme from the point at which it was interrupted, press the START/PAUSE button again.

DELAY START button

The wash programme can be delayed from 30, 60, 90 minutes and then 1 hour by 1 hour up to a maximum of 23 hours.

The button must be pressed after selecting the programme and before pressing the START/PAUSE button.

The figures indicating the delay appear for about 3 seconds in the dis- play. The duration of the selected wash programme is then displayed. After depressing the START/PAUSE button, the machine starts its hourly countdown.

To annul the preset delay, press the START/PAUSE button, then press the DELAY START button until the symbol 0’ is displayed.

Then press the START/PAUSE button again to restart the programme.

13

Image 13

Contents Lavamat L 12510 VI Lavamat L 14510 Dear customer Contents Technical data Service & Spare Parts Guarantee Conditions Building-in General safety Safety instructionsInstallation During use Child safetyPackaging materials DisposalMachine Tips for environmental protection Delay Start delayed start Main features of your washing machineFront view Description of the applianceProgramme selector dial Control panelON/OFF button Delay Start buttonMains-on light START/PAUSE buttonSpin Speed Programme Option buttonsPrewash Display Cancelling a programmeProgramme progress display Opening the door after the programme has started Altering an option/programme which is runningBefore the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleTypes of fabric and care labels Weight of laundryCotton Synthetics Easy-caresDelicates Which detergent? Detergents and additivesTraditional Powders Which form?Switching the machine on How to washLoad the laundry Add detergent and additiveSelection of the desired wash programme Selection of the Delay Start optionSelection of the desired option Starting the programme At the end of the programme Wash programmes Programme chart60E 40EMax Consumption Special programmesPeriodical cleaning Cleaning and maintenanceAfter each wash ExteriorDrain filter Door sealWater inlet filter Frost precautionsEmergency emptying out Something not working? TroubleshootingProblem Noisy Feet have not been Problem Possible cause If grey stains remain on the laundry Unsatisfactory washing resultsFoam is still visible even after the last rinse White residue is left on the laundryThis appliance complies with the following EC directives Technical dataService & Spare Parts Service & Spare Parts08705 929 Help us to help youCustomer care Guarantee does not cover commercial use Guarantee ConditionsEuropean Guarantee Safety instructions for the installer Instructions for installation and electrical con- nectionRear view Front view and side viewUnpacking InstallationLevelling PositioningWater drainage Water inlet cold water connection onlyDo not connect to a hot water supply Into a drainage standpipePush the drain hose Electrical connections Interest of the environmentPermanent connection Building-in Preparation and assembly of the doorDoor Mounting the door HingesCounter-magnet Drill four fixing holes see Fig. G Building-inInstallation From the Electrolux Group. The world’s No choice