Control panel 11
Display (7)
7.17.2
7.3
7.5
7.4
7.1Child safety lock - symbol
7.2Duration of selected programme
After selecting a programme, the duration is displayed in hours and minutes (for example 2.05). The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric. After the programme has started, the time remaining is updated every minute.
Alarm codes
In the event of operating problems, some alarm codes can be displayed, for example E20 (see chapter «What to do if...»).
End of programme
When the programme has finished a flashing zero 0 is displayed, the symbol 7.5 disappears from the display, the pilot light of button 8 goes out and the door can be opened.
Incorrect option selection
If an option which is not compatible with the set wash programme is selected, the message Err is displayed for about 2 seconds and the yellow pilot light of button 8 light starts flashing.
Delay Start
The selected delay (20 hours max) set by means of the relevant button appears on the display for about 3 seconds, then the duration of the previously selected programme is displayed.
The symbol 7.3 will appear on the display. The delay time value decreases by one unit every hour. When only 1 hour remains, the time decreases every minute.