Roland MC-909 owner manual Gated Reverb, Stereo Delay MFX2 only, 104

Multi-Effects List

38: GATED REVERB

This is a special type of reverb in which the reverb is cut off without

being allowed to decay naturally.

fig.MFX38

L in			2-Band	L out
	Balance D		EQ
			Balance W
	Gated Reverb		Balance W
R in			2-Band	R out
	Balance D		EQ
Parameter	Value	Description
Type	NORMAL,	Type of reverb
	REVERSE		NORMAL: conventional gated
			reverb
			REVERSE: backwards reverb
Pre Delay	0.0–100.0	Adjusts the time until the reverb
	ms	sound is heard.
Time	5–500 ms	Adjusts the time from when the re-
		verb is first heard until it disap-
		pears.
Pan #1	L64–63R	Stereo location of Pitch Shift
Low Gain	-15– +15 dB	Gain of the low frequency range
High Gain	-15– +15 dB	Gain of the high frequency range
Balance #2	D100:0W–	Volume balance between the direct
	D0:100W	sound (D) and the reverb sound (W)
Level	0–127	Output level

39: STEREO DELAY (MFX2 only)

This is a stereo delay.

When Feedback Mode is NORMAL:

fig.MFX39a

		Balance D		2-Band
L in					L out
				EQ
		Delay		Balance W
		Feedback
		Feedback
				Balance W
		Delay
R in				2-Band	R out
		Balance D		EQ
When Feedback Mode is CROSS:
fig.MFX39b
		Balance D		2-Band
L in					L out
				EQ
		Delay		Balance W
		Feedback
		Feedback
				Balance W
		Delay
R in				2-Band	R out
		Balance D		EQ
Parameter	Value		Description
Feedback	NORMAL,		Selects the way in which delay
Mode	CROSS		sound is fed back into the effect.
			(See the figures above.)
Delay Left	0–2000 ms,		Adjusts the time until the delay
Delay Right	note		sound is heard.
Phase Left	NORMAL,		Phase of the delay sound
Phase Right	INVERT
Feedback	-98– +98 %		Adjusts the amount of the delay
#1			sound that’s fed back into the effect.
			Negative (-) settings invert the
			phase.
HF Damp	200–8000		Adjusts the frequency above which
	Hz, BY-		sound fed back to the effect is fil-
	PASS		tered out. If you don’t want to filter
			out any high frequencies, set this
			parameter to BYPASS.
Low Gain	-15– +15 dB		Gain of the low frequency range
High Gain	-15– +15 dB		Gain of the high frequency range
Balance #2	D100:0W–		Volume balance between the direct
	D0:100W		sound (D) and the delay sound (W)
Level	0–127		Output level

104