Selecting a patch/rhythm set, Selecting from a list

fig.2-03

Bank		Bank/Number/Name of the
Num (Number)		patch (rhythm set) used by each
Patch/Rhythm		part (1–16)
(Patch Name/Rhythm Set
Name)
Lev (Part Level)		Refer to p. 33
Pan (Part Pan)
Key (Part Key Shift)
Rev (Par Reverb Send Level)
Out (Part Output Assign)		How the original sound of each
		part will be output
		DRY: Output to MIX OUTPUT
		jacks without passing through
		effects
		MFX1 (2): Output through
		multi-effects 1 (or 2)
		COMP: Output through the
		compressor
		DIR1 (2): Output to the DI-
		RECT 1 (or DIRECT 2) jacks
		without passing through ef-
		fects
		RHY: Output according to the
		settings of the rhythm set as-
		signed to the part
		* “RHY” can be set only when a
		rhythm set is assigned to the
		part.
Seq		Output distination from the se-
(Sequencer Output Assign)		quencer
		INT: Internal soundgenerator
		EXT: MIDI OUT connector
		BOTH: Both of the above si-
		multaneously
Function buttons

[F1 (List)]	Select a patch/rhythm set from a list (p. 55).
(Patch List)
[F2 (Edit)]	Edit the settings of a patch/rhythm set (p. 56,
(Patch Edit)	p. 70).
[F3 (Mixer)]	Specify the volume/pan of each part (p. 33).
(Part Mixer)
[F4 (Effects)]	Apply special effects to the sound (p. 88).
[F5 (Mastering)]	Make settings for the mastering effect (p.
	108).
[F6 (BPM/Click)]	Set the tempo, and turn the metronome on/
	off (p. 25).

Patch Edit

The currently selected patch/rhythm set (the current patch/ rhythm set) will be highlighted.

Patch/Sample Mode

2.To select a patch, press [F3 (Patch)]. To select a rhythm set, press [F4 (Rhythm)].

3.Use [F1] [F2] or [CURSOR (left/right)] to select a bank.

4.Press [F6 (Select)] to finalize your selection.

1.In the Patch Select screen, press [F5 (Categ)].

The patches will be displayed by category.

2.Use [F1] [F2] or [CURSOR (left/right)] to select a category.

3.Press [F6 (Select)] to finalize your selection.

Rhythm sets do not have categories.

1.In the top screen of Patch/Sample mode, use [CURSOR] to move the cursor to the patch/rhythm set name or bank.

2.Use [VALUE] or [INC/DEC] to make your selection.