Patch Edit

Wave

These parameters select the PCM waveform that is to form the basis of the tone, and apply effects to the waveform.

Parameter

Range

Explanation

 

 

 

 

 

Wave Group

INT, SRX, PRES,

Group of the waveform upon which the tone is to be based

 

 

USER, CARD

INT: Waveforms stored in internal memory

 

 

 

SRX: Waveforms stored in a wave expansion board

 

 

 

PRES: Preset sample waveforms

 

 

 

USER: User sample waveforms

 

 

 

CARD: Card sample waveforms

 

 

 

* SRX can be selected only if a wave expansion board is installed.

 

Wave No. L/MONO

0 (OFF)–693

Waveform upon which the tone is to be based

 

Wave No. R

 

On the MC-909 you can specify a separate waveform for the L and R channels.

 

 

 

* If you want to use the same waveform for the L and R channels, set the R channel to 0 (OFF).

Mode

Wave Gain

-6, 0, +6, +12 dB

Waveform gain (amplitude)

 

 

 

The value will change in steps of 6 dB (decibels). An increase of 6 dB will double the gain. If you

Patch/Sample

 

 

want to use the booster to distort the sound, it is effective to set this to the maximum.

 

 

 

FXM (Frequency Cross Modulation)

 

 

FMX creates a complex overtone structure by using a specific waveform to frequency-modulate the selected waveform. This is suitable for cre-

 

ating extreme sounds or sound effects.

 

 

FXM SW

OFF, ON

Selects whether FMX will be used (ON) or not (OFF)

 

(Wave FXM Switch)

 

 

 

FXM Color

1–4

Selects how FXM will apply frequency modulation.

 

(Wave FXM Color)

 

Increasing this value will produce a rougher sound. Decreasing this value will produce a more

 

 

 

metallic sound.

 

FXM Depth

0–16

Depth of frequency modulation applied by FXM

 

(Wave FXM Depth)

 

 

 

Pitch

These parameters specify the pitch of the waveform, and how your keyboard playing dynamics will affect the pitch envelope (change in pitch

over time).

Parameter

Value

Description

 

 

 

Patch Coarse Tune #

-48– +48

Pitch of the entire patch

 

 

Specifies the pitch in semitone steps over a range of +/-4 octaves.

Patch Fine Tune #

-50– +50

Pitch of the entire patch

 

 

Adjusts the pitch in one-cent steps (1/100th of a semitone) over a range of 1/2 semitone upward or

 

 

downward.

Tone Coarse Tune

-48– +48

Pitch of the tone

 

 

Adjusts the pitch in semitone steps over a range of +/-4 octaves.

Tone Fine Tune

-50– +50

Pitch of the tone

 

 

Adjusts the pitch in one-cent steps (1/100th of a semitone) over a range of 1/2 semitone upward or

 

 

downward.

Rnd Pitch Depth

0–1200

Range of random pitch change that occurs each time a pad is pressed

(Tone Random Pitch

 

Set this to 0 if you do not want the pitch to change randomly. This value is set in units of one cent (1/

Depth)

 

100th of a semitone).

57

Page 57
Image 57
Roland MC-909 owner manual Patch Edit Wave, Pitch, FXM Frequency Cross Modulation, Parameter Value Description