Roland MC-909 owner manual System, 126

System

Here you can make settings that affect the entire system, such as

those for tuning and synchronization.

1.Press [MENU].

2.Press [CURSOR (up/down)] to select “System.”

In Pattern mode/Song mode, you can also access this by

holding down [SHIFT] and pressing [F5 (System)].

fig.6-01

3.Press [ENTER].

The System menu will appear.

fig.6-02

4.Press [F1]–[F6] to select the item that you want to set.

[F1	(Panel/Control)]	Make settings for the panel control-
(Panel/Controller)		lers and the screen.
[F2	(Seq/MIDI)]	Make sequencer and MIDI-related
(Sequencer/MIDI)		settings.
[F3	(Sound)]	Specify the tuning and how the
		sounds are to be produced.
[F4	(Sampling)]	Make sampling-related settings.
[F5	(D Beam)]	Make D Beam settings.
[F6	(System Info)]	View the state of the MC-909.
(System Information)

5.Press a function button to make further selections.

6.Use [CURSOR (up/down)] to select a parameter.

7.Use [VALUE] or [INC/DEC] to edit the value.

*Settings made here will revert to their original value as soon as you turn off the power. If you want to keep your settings, press [F6 (System Write)].

8.When you are finished making settings, press [EXIT].

You will return to the System menu.

9.Press [EXIT] once again to exit the System menu.

126